EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Characterization of Photocurable Functionalized-CNT Nanocoating to Mitigate the Naturally Emission of Radon Gas

Aisha Dalila Ab Aziz, Mohd Hamzah Harun, Izzuddin Mohamad Zaharuddin, Nor Adnin Ezani Mohd Ezani, Norfazlinayati Othman, Mahathir Mohamed, Mohd Sofian Alias, Mohd Faizal Abd Rahman, Khairil Nor Kamal Umar, Nurul Huda Mudri, Khairul Azhar Abdul Halim, Mohamad Syahiran Mustafa und 6 weitere

Journal of Material Science and Radiation · 2025

DOI: 10.56566/jmsr.v1i3.480 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Material Science and Radiation, 2025. Verfasst von Aisha Dalila Ab Aziz und 17 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focuses on the synthesis and characterization of an anti-radon photocurable nanocoating formulated using a UV-curable formulation incorporated with functionalized carbon nanotubes (F-CNTs). The coating was prepared using Ebecryl 600 (urethane acrylate oligomer) and TMPTA (monomer), with GPTMS as a coupling agent and various photoinitiator combinations. Different F-CNT loadings ranging from 0.1 to 0.9 wt% were studied to evaluate their effects on coating performance. The samples were cured under UV irradiation for 2–20 passes to investigate the influence of exposure time on polymer crosslinking. Characterization analyses including pendulum hardness, Fourier-transform infrared spectroscopy (FTIR), viscosity, gel content, and radon gas permeability were performed. Results indicated that the incorporation of F-CNTs enhanced the mechanical strength and crosslinking density of the coating. The optimal formulation exhibited a hardness of 150.33 s (BAPO + 8 passes) and a gel content of 97%. Furthermore, radon concentration measurements showed a 28.9% reduction after applying a single coating layer, confirming the coating’s potential as an effective barrier for radon gas mitigation.

Zitieren

APA

Aziz, A. D. A., Harun, M. H., Zaharuddin, I. M., Ezani, N. A. E. M., Othman, N., Mohamed, M., Alias, M. S., Rahman, M. F. A., Umar, K. N. K., Mudri, N. H., Halim, K. A. A., Mustafa, M. S., Mejus, L., Razalim, F. A. A., Ismail, R. C., Sani, A. M. M., Faisal, S. M., & Tajau, R. (2025). Characterization of Photocurable Functionalized-CNT Nanocoating to Mitigate the Naturally Emission of Radon Gas. Journal of Material Science and Radiation. https://doi.org/10.56566/jmsr.v1i3.480

Vancouver

Aziz ADA, Harun MH, Zaharuddin IM, Ezani NAEM, Othman N, Mohamed M, et al. Characterization of Photocurable Functionalized-CNT Nanocoating to Mitigate the Naturally Emission of Radon Gas. Journal of Material Science and Radiation. 2025. doi:10.56566/jmsr.v1i3.480

BibTeX
@article{Aziz2025,
  author = {Aziz, Aisha Dalila Ab and Harun, Mohd Hamzah and Zaharuddin, Izzuddin Mohamad and Ezani, Nor Adnin Ezani Mohd and Othman, Norfazlinayati and Mohamed, Mahathir and Alias, Mohd Sofian and Rahman, Mohd Faizal Abd and Umar, Khairil Nor Kamal and Mudri, Nurul Huda and Halim, Khairul Azhar Abdul and Mustafa, Mohamad Syahiran and Mejus, Lakam and Razalim, Faizal Azrin Abdul and Ismail, Rosley Che and Sani, Abdul Muiz Mohd and Faisal, Sharilla Mohd and Tajau, Rida},
  title = {Characterization of Photocurable Functionalized-CNT Nanocoating to Mitigate the Naturally Emission of Radon Gas},
  journal = {Journal of Material Science and Radiation},
  year = {2025},
  doi = {10.56566/jmsr.v1i3.480}
}
Kostenlos starten →