Production and Characterization of Cu/CNT Nanocomposites
Applied Sciences · 07.03.2023 · 13 (6) · 3378
DOI: 10.3390/app13063378 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 07.03.2023. Verfasst von Íris Carneiro und 4 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Portuguese Foundation for Science and Technology (FCT), P2020|Norte2020, FCT—Fundação para a Ciência e a Tecnologia.
Abstract (Originalsprache)
In this research, copper nanocomposites reinforced with carbon nanotubes (CNTs) were produced by ultrasonication and conventional sintering, followed by cold rolling. These nanocomposites may be good candidates due to their excellent properties for components in the electrical, electronics, or aerospace industries with highly demanding requirements. The main objectives of this work were to produce and characterize the Cu/CNT nanocomposites, identify the strengthening mechanisms, and study the deformation behavior of the nanocomposites during cold rolling. The nanocomposites exhibited an improvement in hardness and tensile strength of 17 and 67%, respectively, attesting to the strengthening effect of the reinforced material. The yield strength of the nanocomposites was determined considering different mechanisms: (1) load transfer, (2) grain refinement or texture, (3) dislocation, and (4) Orowan strengthening mechanisms. The microstructural and calculated results show that the mechanism that contributes the most to the increase in the properties of the nanocomposite is the load transfer. The nanocomposites show a different texture evolution of the Cu matrix during cold rolling. This can be due to differences in the active slip planes between the matrix and the nanocomposite, which affects the lattice rotation.
Förderung
- Portuguese Foundation for Science and Technology (FCT)
- P2020|Norte2020
- FCT—Fundação para a Ciência e a Tecnologia
- ARISE
Zitieren
APA
Carneiro, Í., Monteiro, B., Ribeiro, B., Fernandes, J. V., & Simões, S. (2023). Production and Characterization of Cu/CNT Nanocomposites. Applied Sciences, 13(6), 3378. https://doi.org/10.3390/app13063378
Vancouver
Carneiro Í, Monteiro B, Ribeiro B, Fernandes JV, Simões S. Production and Characterization of Cu/CNT Nanocomposites. Applied Sciences. 2023;13(6):3378. doi:10.3390/app13063378
BibTeX
@article{Carneiro2023,
author = {Carneiro, Íris and Monteiro, Beatriz and Ribeiro, Bernardo and Fernandes, José V. and Simões, Sónia},
title = {Production and Characterization of Cu/CNT Nanocomposites},
journal = {Applied Sciences},
year = {2023},
volume = {13},
number = {6},
pages = {3378},
doi = {10.3390/app13063378}
}
EUVIMED