EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Developing a Novel Cold Bitumen Emulsion Mixes by Adding Geopolymer

Ahmed Mahdi Ibrahim, Taher M. Ahmed, Thamir Y. Ahmed

Salud, Ciencia y Tecnología - Serie de Conferencias · 01.01.2024 · 3 · 864

DOI: 10.56294/sctconf2024864 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Salud, Ciencia y Tecnología - Serie de Conferencias, online erschienen am 01.01.2024. Verfasst von Ahmed Mahdi Ibrahim und 2 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cold bituminous emulsion mixtures (CBEMs), which are less costly, need less energy, and are more environmentally friendly, maybe can take the place of hot mix asphalt (HMA) in the future. It is known, that these mixtures have a very low initial strength, requiring longer curing times and more susceptibility to moisture damage. Geopolymer is often used in the fields of concrete and soil improvement performance. It has not been used in the field of asphalt mixtures; so, this study can be considered as the first time of using it. This study tried to make a new CBEM by incorporating the Geopolymer into the mix to improve its initial performance and enhance early strength. Geopolymer was created inside CBEM by activating the fly ash using an alkali solution. Three percentages of fly ash (1, 3, and 5 %) were used for creating Geopolymer; and different curing periods (3, 7, and 14 days) were also used. Marshall stability and Indirect Tensile Strength tests were conducted to assess the mechanical properties of mixtures. The results showed that Geopolymer can be a promising material for creating cold mixes with a better initial strength compared to traditional cold mixes. Comparing CBEMs with (5 % FA + 0 % CF) to control CBEMs, the increase with MS was approximately (32 % at 3 days, 43 % at 7 days, and 37 % at 14 days). The performance of cold mixes was enhanced by the addition of Geopolymer with different FA contents and curing times when compared to control CBEMs. This improvement was particularly noticeable at longer curing times and higher fly ash contents

Zitieren

APA

Ibrahim, A. M., Ahmed, T. M., & Ahmed, T. Y. (2024). Developing a Novel Cold Bitumen Emulsion Mixes by Adding Geopolymer. Salud, Ciencia y Tecnología - Serie de Conferencias, 3, 864. https://doi.org/10.56294/sctconf2024864

Vancouver

Ibrahim AM, Ahmed TM, Ahmed TY. Developing a Novel Cold Bitumen Emulsion Mixes by Adding Geopolymer. Salud, Ciencia y Tecnología - Serie de Conferencias. 2024;3:864. doi:10.56294/sctconf2024864

BibTeX
@article{Ibrahim2024,
  author = {Ibrahim, Ahmed Mahdi and Ahmed, Taher M. and Ahmed, Thamir Y.},
  title = {Developing a Novel Cold Bitumen Emulsion Mixes by Adding Geopolymer},
  journal = {Salud, Ciencia y Tecnología - Serie de Conferencias},
  year = {2024},
  volume = {3},
  pages = {864},
  doi = {10.56294/sctconf2024864}
}
Kostenlos starten →