EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cold In-Place Recycling with Bitumen Emulsion and Hydraulic Binder: Case Study Serbia

Milan Marinković

Applied Sciences · 12.11.2026 · 16 (22) · 11203

DOI: 10.3390/app162211203 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 12.11.2026. Verfasst von Milan Marinković. Die Arbeit nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An increase in the number of inhabitants requires building new infrastructure as well as the maintenance of the existing traffic infrastructure. For economic and environmental reasons, it is necessary to use the existing materials as much as possible. One procedure that saves money and reduces environmental impact is pavement recycling. Several recycling methods exist, and this paper focuses on cold in-place recycling. The use of reclaimed asphalt pavement (RAP) and aggregate in cold in-place recycling is presented. The road on which the cold in-place recycling was applied is 350 m long and is located in Serbia. Bitumen emulsion and cement-based hydraulic binder were added as binders. The hydraulic binder contains fly ash, an eco-friendly material. After correcting the RAP granulometric composition, the optimal fluid content was determined, and samples with 2% and 3% CBHB were prepared with 2%, 4%, and 6% bitumen emulsion. The samples were tested for indirect tensile strength (ITS), tensile strength ratio (TSR), and dynamic modulus of elasticity (DME). ITS was tested on samples cured for seven and 28 days in dry conditions and 28 days in wet conditions. All mixtures with 3%CBHB met all criteria, while mixtures with 2%CBHB, only the one with 4% bitumen emulsion met the criteria.

Zitieren

APA

Marinković, M. (2026). Cold In-Place Recycling with Bitumen Emulsion and Hydraulic Binder: Case Study Serbia. Applied Sciences, 16(22), 11203. https://doi.org/10.3390/app162211203

Vancouver

Marinković M. Cold In-Place Recycling with Bitumen Emulsion and Hydraulic Binder: Case Study Serbia. Applied Sciences. 2026;16(22):11203. doi:10.3390/app162211203

BibTeX
@article{Marinkovi2026,
  author = {Marinković, Milan},
  title = {Cold In-Place Recycling with Bitumen Emulsion and Hydraulic Binder: Case Study Serbia},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {22},
  pages = {11203},
  doi = {10.3390/app162211203}
}
Kostenlos starten →