EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation the Influence of Post-Weld Heat Treatment Parameters on the Impact Toughness of ASTM A106 Grade B Thick-Walled Pipes

Muhammad Bilal, Hussein Ali

NTU Journal of Engineering and Technology · 30.09.2026 · 5 (3)

DOI: 10.56286/e7wwd149 ↗

Kurz gefasst

Fachartikel in der Zeitschrift NTU Journal of Engineering and Technology, online erschienen am 30.09.2026. Verfasst von Muhammad Bilal und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The paper investigates the effects of post-weld heat treatment (PWHT) parameters on impact toughness of ASTM A106 Grade B steel with wall thickness of 21.44 mm, in which PWHT is mandatory. Welding had a considerable effect on the toughness of the material, dropping to 54.73 J after welding as compared to 107.36 J in the as-received state, mainly because of the residual stresses and microstructural heterogeneity due to welding. The Taguchi Design of experiments was used to design the PWHT process to restore and enhance toughness. The parameters of the process chosen were the temperature of PWHT, the holding time and cooling medium. Analysis of Variance (ANOVA) was conducted to evaluate the significance and percentage contribution of each factor to reach a statistical evaluation. The findings showed that PWHT was very effective in restoring welding-induced toughness loss; reported impact energy values were between 64.82 J and 115.32 J. In optimized PWHT conditions, the impact toughness was higher than that of the as-received material. ANOVA showed that the temperature was the most significant factor that accounted 63.44% of the toughness variation, followed by the cooling medium (18.40%), and holding time (17.72%). All the parameters were considered statistically significant (p < 0.05).

Zitieren

APA

Bilal, M., & Ali, H. (2026). Investigation the Influence of Post-Weld Heat Treatment Parameters on the Impact Toughness of ASTM A106 Grade B Thick-Walled Pipes. NTU Journal of Engineering and Technology, 5(3). https://doi.org/10.56286/e7wwd149

Vancouver

Bilal M, Ali H. Investigation the Influence of Post-Weld Heat Treatment Parameters on the Impact Toughness of ASTM A106 Grade B Thick-Walled Pipes. NTU Journal of Engineering and Technology. 2026;5(3). doi:10.56286/e7wwd149

BibTeX
@article{Bilal2026,
  author = {Bilal, Muhammad and Ali, Hussein},
  title = {Investigation the Influence of Post-Weld Heat Treatment Parameters on the Impact Toughness of ASTM A106 Grade B Thick-Walled Pipes},
  journal = {NTU Journal of Engineering and Technology},
  year = {2026},
  volume = {5},
  number = {3},
  doi = {10.56286/e7wwd149}
}
Kostenlos starten →