EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improving the Weld Heat-Affected-Zone (HAZ) Toughness of High-Strength Thick-Walled Line Pipes

Yan Ma, Lihong Su, Chen Shen, Leigh Fletcher, Huijun Li, Leilei Sun, Lei Zheng, Chuanguo Zhang

Metals · 16.12.2023 · 13 (12) · 2018

DOI: 10.3390/met13122018 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 16.12.2023. Verfasst von Yan Ma und 7 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Baosteel-Australia Joint Research and Development Centre.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The low-temperature fracture toughness of double-V weld seams is a well-known challenge due to the essential increased heat input for heavy-wall pipelines. A thorough investigation was conducted to explore the impact of the heat input on the grain size and precipitate coarsening, correlating the microstructure with the heat-affected-zone (HAZ) toughness. The results indicated that the actual weldments showed a toughness transition zone at −20 °C, with considerable scattering in Charpy V-notch (CVN) tests. Gleeble thermal simulations confirmed the decreased toughness of the coarse-grained HAZ (CGHAZ) with increasing heat input and prior austenite grain size (PAGS). A specially designed thermal treatment demonstrated its potential for enhancing the toughness of the CGHAZ, with the recommended thermal cycle involving peak temperatures of 700 and 800 °C, holding for 1 s, and rapid cooling. The toughness of the intercritically reheated CGHAZ (ICCGHAZ) improved with higher intercritical reheating temperatures and the removal of necklace-type M–A constituents along the PAG. Despite various thermal treatments, no significant improvements were observed in the toughness of the ICCGHAZ. Future work was suggested for optimising the use of tack welds to reduce the effective heat input (HI) associated with double-sided submerged arc welding (SAW).

Förderung

  • Baosteel-Australia Joint Research and Development Centre

Zitieren

APA

Ma, Y., Su, L., Shen, C., Fletcher, L., Li, H., Sun, L., Zheng, L., & Zhang, C. (2023). Improving the Weld Heat-Affected-Zone (HAZ) Toughness of High-Strength Thick-Walled Line Pipes. Metals, 13(12), 2018. https://doi.org/10.3390/met13122018

Vancouver

Ma Y, Su L, Shen C, Fletcher L, Li H, Sun L, et al. Improving the Weld Heat-Affected-Zone (HAZ) Toughness of High-Strength Thick-Walled Line Pipes. Metals. 2023;13(12):2018. doi:10.3390/met13122018

BibTeX
@article{Ma2023,
  author = {Ma, Yan and Su, Lihong and Shen, Chen and Fletcher, Leigh and Li, Huijun and Sun, Leilei and Zheng, Lei and Zhang, Chuanguo},
  title = {Improving the Weld Heat-Affected-Zone (HAZ) Toughness of High-Strength Thick-Walled Line Pipes},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {12},
  pages = {2018},
  doi = {10.3390/met13122018}
}
Kostenlos starten →