The Effect of Preheating on Weld Defect Formation Using X-ray Radiography
NTU Journal of Engineering and Technology · 2025
DOI: 10.56286/9cv1sj39 ↗Kurz gefasst
Fachartikel in der Zeitschrift NTU Journal of Engineering and Technology, 2025. Verfasst von Elaf Ahmed Ali und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The manufacturing of long-section pipes is expensive and demands sophisticated procedures, requiring the assembly of smaller pipes by welding. Welding is essential in the oil and gas sectors and several other industries. A welding procedure was executed on two ASTM A106 grade B pipes utilizing GTAW and SMAW techniques for four layers. Testing identified a transverse crack in a welded joint (Test No-01A) at site 20, measuring 4 mm. A PMI test established the chemical composition of the weld joint. A key factor contributing to cracks is the temperature disparity between the weld zone and the base metal. To alleviate this, the joints were warmed prior to welding, The results showed that preheating the metal before the welding process reduces or prevents the occurrence of cracks by minimizing the temperature gradient between the base metal and the welding temperature. As the PMI test findings revealed discrepancies in the chemical composition of the welded joints prior to and subsequent to welding, attributable to chemical reactions throughout the operation. These findings underscore the influence of temperature and chemical alterations on weld integrity.
Zitieren
APA
Ali, E. A., & Younis, A. D. (2025). The Effect of Preheating on Weld Defect Formation Using X-ray Radiography. NTU Journal of Engineering and Technology. https://doi.org/10.56286/9cv1sj39
Vancouver
Ali EA, Younis AD. The Effect of Preheating on Weld Defect Formation Using X-ray Radiography. NTU Journal of Engineering and Technology. 2025. doi:10.56286/9cv1sj39
BibTeX
@article{Ali2025,
author = {Ali, Elaf Ahmed and Younis, A. D.},
title = {The Effect of Preheating on Weld Defect Formation Using X-ray Radiography},
journal = {NTU Journal of Engineering and Technology},
year = {2025},
doi = {10.56286/9cv1sj39}
}
EUVIMED