Comparative of Permanent Magnet Motors Based on Rotor Topologies and Magnet Types
NTU Journal of Engineering and Technology · 28.06.2026 · 5 (2)
DOI: 10.56286/3fsq9971 ↗Kurz gefasst
Fachartikel in der Zeitschrift NTU Journal of Engineering and Technology, online erschienen am 28.06.2026. Verfasst von Mohammed Khalid almani und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This research examines slotless permanent magnet synchronous machines (PMSMs) with surface-mounted (SPM) and in-plane-mounted (IPM) topologies using NdFeB and ferrite magnets. To ensure a fair comparison, the original and equivalent surface areas of the magnets were calculated, as shown in Table 4 for neodymium, iron, and boron magnets, and for ferrite. Finite element analysis (FEM) confirmed equal flux per pole. Parametric evaluations of the number of poles, magnet thickness, air gap length, pole-to-pitch ratio, splitting ratio, and shaft material were performed using ANSYS 2D Maxwell, with validation using MATLAB. The results demonstrate that while NdFeB provides higher flux density, optimized ferrite designs achieve lower flux density with fewer harmonics, with equal flux in both cases, highlighting ferrite as a promising and low-cost alternative. These results give an explanation for the effects of rotor parameters in slotless machines and lay the foundation for future studies incorporating slots and windings.
Zitieren
APA
almani, M. K., Ali, A. J., & Shanshal, A. K. (2026). Comparative of Permanent Magnet Motors Based on Rotor Topologies and Magnet Types. NTU Journal of Engineering and Technology, 5(2). https://doi.org/10.56286/3fsq9971
Vancouver
almani MK, Ali AJ, Shanshal AK. Comparative of Permanent Magnet Motors Based on Rotor Topologies and Magnet Types. NTU Journal of Engineering and Technology. 2026;5(2). doi:10.56286/3fsq9971
BibTeX
@article{almani2026,
author = {almani, Mohammed Khalid and Ali, Ahmed J. and Shanshal, Abdullah K.},
title = {Comparative of Permanent Magnet Motors Based on Rotor Topologies and Magnet Types},
journal = {NTU Journal of Engineering and Technology},
year = {2026},
volume = {5},
number = {2},
doi = {10.56286/3fsq9971}
}
EUVIMED