EUVIMEDEUVIMED entdecken
Crossref

Comparative Study of Cogging Torque, Torque Ripple, and Vibration on Stator Tooth Chamfer Types in Permanent Magnet Synchronous Motors

Yun-Jae Won, Jae-Hyun Kim, Soo-Min An, Myung-Seop Lim

IEEE Transactions on Magnetics · 2024-09 · 60 (9) · 1-5

DOI: 10.1109/tmag.2024.3412965 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Magnetics, 2024-09. Verfasst von Yun-Jae Won und 3 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 9 Literaturangaben. Gefördert von: Korea Institute of Energy Technology Evaluation and Planning, Korea Government, Development of Common Base Technology for Medium Power Industrial Motors.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The high power density, high efficiency, and wide speed range of permanent magnet synchronous motors (PMSMs) are attractive features. However, the cogging torque and unsuppressed torque ripple of PMSMs degrade torque quality and reliability and cause vibration. This article compares the effectiveness of PMSMs in reducing the cogging torque, torque ripple, and vibration by applying each stator tooth chamfer types: inner eccentricity chamfer, outer eccentricity chamfer, linear chamfer, and circular chamfer. First, stator tooth chamfers were applied to the reference model to confirm the tendency of cogging torque, torque ripple, and electromagnetic force according to the design variables by chamfer types, and it was demonstrated that the chamfer needs to be applied in a way that reduces the harmonics of the air-gap magnetic flux density to improve the performances through finite element analysis (FEA). Next, the optimum design for reducing cogging torque, torque ripple, and electromagnetic force was performed for each stator tooth chamfer types for a valid comparison. As a result, it was confirmed that there are advantageous stator tooth chamfer types based on each performance. Finally, a prototype was fabricated and tested to validate the FEA results of the optimum model for performance comparison.

Förderung

  • Korea Institute of Energy Technology Evaluation and Planning
  • Korea Government
  • Development of Common Base Technology for Medium Power Industrial Motors

Zitieren

APA

Won, Y., Kim, J., An, S., & Lim, M. (2024). Comparative Study of Cogging Torque, Torque Ripple, and Vibration on Stator Tooth Chamfer Types in Permanent Magnet Synchronous Motors. IEEE Transactions on Magnetics, 60(9), 1-5. https://doi.org/10.1109/tmag.2024.3412965

Vancouver

Won Y, Kim J, An S, Lim M. Comparative Study of Cogging Torque, Torque Ripple, and Vibration on Stator Tooth Chamfer Types in Permanent Magnet Synchronous Motors. IEEE Transactions on Magnetics. 2024;60(9):1-5. doi:10.1109/tmag.2024.3412965

BibTeX
@article{Won2024,
  author = {Won, Yun-Jae and Kim, Jae-Hyun and An, Soo-Min and Lim, Myung-Seop},
  title = {Comparative Study of Cogging Torque, Torque Ripple, and Vibration on Stator Tooth Chamfer Types in Permanent Magnet Synchronous Motors},
  journal = {IEEE Transactions on Magnetics},
  year = {2024},
  volume = {60},
  number = {9},
  pages = {1--5},
  doi = {10.1109/tmag.2024.3412965}
}
Kostenlos starten →