EUVIMEDEUVIMED entdecken
Crossref

Tailoring the properties of alumina ceramic nanoparticles via chromium doping

Mojahid M. Najim, Ban A. Yousif, Mohammed RASHEED

Experimental and Theoretical NANOTECHNOLOGY · 15.04.2026 · 10 (2) · 551-569

DOI: 10.56053/10.2.551 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Experimental and Theoretical NANOTECHNOLOGY, online erschienen am 15.04.2026. Verfasst von Mojahid M. Najim und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cr-doped Al2O3 (Al2O3:Cr) ceramic nanoparticles (AlCr0–AlCr5) are successfully synthesized via the sol–gel method and calcined at 1000 °C. X-ray diffraction (XRD) analysis confirmed the formation of a single-phase α-Al2O3 (corundum structure, space group R-3c) with characteristic reflections at 2θ ≈ 25.6°, 35.1°, 37.8°, 43.4°, 52.6°, and 57.5°. The crystallite size increased from ~25 nm for AlCr0 to ~36 nm for AlCr5, accompanied by a reduction in FWHM, indicating improved crystallinity with increasing Cr content. FTIR spectra exhibited characteristic Al–O vibrational bands in the 500–800 cm⁻¹ region, while Raman analysis confirmed Eg and A1g modes of α-Al2O3 with enhanced peak intensity at higher doping levels. Density measurements showed an increase in bulk density from ~3.20 to ~3.35 g/cm3 and a corresponding decrease in apparent porosity from ~28% to ~22% with increasing Cr concentration. Thermal analysis revealed total weight loss decreasing from ~6.0% (AlCr0) to ~4.3% (AlCr5), indicating enhanced thermal stability. DSC results showed an exothermic crystallization peak around ~800–830 °C, becoming sharper with Cr addition, while DTG confirmed reduced decomposition rates at higher doping levels. ICP-OES analysis demonstrated composition-dependent Cr3+ ion release, decreasing from ~0.007 ppm (AlCr0) to ~0.002 ppm (AlCr5), reflecting improved chemical stability. Cr incorporation enhances crystallinity, densification, thermal stability, and chemical resistance without altering the α-Al₂O₃ phase. Among all samples, AlCr5 exhibited the best overall performance, making it a promising candidate for advanced ceramic applications.

Zitieren

APA

Najim, M. M., Yousif, B. A., & RASHEED, M. (2026). Tailoring the properties of alumina ceramic nanoparticles via chromium doping. Experimental and Theoretical NANOTECHNOLOGY, 10(2), 551-569. https://doi.org/10.56053/10.2.551

Vancouver

Najim MM, Yousif BA, RASHEED M. Tailoring the properties of alumina ceramic nanoparticles via chromium doping. Experimental and Theoretical NANOTECHNOLOGY. 2026;10(2):551-569. doi:10.56053/10.2.551

BibTeX
@article{Najim2026,
  author = {Najim, Mojahid M. and Yousif, Ban A. and RASHEED, Mohammed},
  title = {Tailoring the properties of alumina ceramic nanoparticles via chromium doping},
  journal = {Experimental and Theoretical NANOTECHNOLOGY},
  year = {2026},
  volume = {10},
  number = {2},
  pages = {551--569},
  doi = {10.56053/10.2.551}
}
Kostenlos starten →