Efficiency of a novel electron beam hardening for surface integrity improvement in normalised C45 steel cylindrical specimens
Archives of Materials Science and Engineering · 01.01.2026
DOI: 10.5604/01.3001.0055.7410 ↗Kurz gefasst
Fachartikel in der Zeitschrift Archives of Materials Science and Engineering, erschienen am 01.01.2026. Verfasst von M. Atanasova und 3 weiteren Autor:innen.
Abstract (Originalsprache)
Evaluation of the potential of a novel electron beam hardening (EBH) process for improving the surface integrity (SI) of C45 steel cylindrical specimens of a normalised initial material structure.
An EBH experiment based on the one-factor-at-a-time technique, X-ray diffraction analysis, phase analysis, and SEM microstructural analysis was employed to study the SI characteristics.
Compared to the as-received initial structure, EBH of normalised C45 steel specimens produces very similar results for the microhardness (HV0.05), the axial and hoop RSs, and phase and structural changes in the surface layer, but higher roughness (Ra) because of the less pronounced glazing effect.
The results and conclusions regarding the effects of EBH on SI characteristics apply to the ranges of EBH operating parameters studied. The results form the basis for a planned experiment that considers interactions among the operating parameters.
The novel EBH process is a cost-effective surface-hardening method for shafts and axles made of normalised C45 steel.
The study demonstrates, for the first time, the effectiveness of a novel EBH process for the transformation surface hardening of cylindrical C45 steel parts, accounting for the effect of the normalised initial structure.
Zitieren
APA
Atanasova, M., Anchev, A., Dunchev, V., & Dikova, T. (2026). Efficiency of a novel electron beam hardening for surface integrity improvement in normalised C45 steel cylindrical specimens. Archives of Materials Science and Engineering. https://doi.org/10.5604/01.3001.0055.7410
Vancouver
Atanasova M, Anchev A, Dunchev V, Dikova T. Efficiency of a novel electron beam hardening for surface integrity improvement in normalised C45 steel cylindrical specimens. Archives of Materials Science and Engineering. 2026. doi:10.5604/01.3001.0055.7410
BibTeX
@article{Atanasova2026,
author = {Atanasova, M. and Anchev, A. and Dunchev, V. and Dikova, T.},
title = {Efficiency of a novel electron beam hardening for surface integrity improvement in normalised C45 steel cylindrical specimens},
journal = {Archives of Materials Science and Engineering},
year = {2026},
doi = {10.5604/01.3001.0055.7410}
}
EUVIMED