EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of Grinding Depth on Dislocation Structures and Surface Hardening in C45 Steel

Alicja Stanisławska, Dorota Moszczyńska, Jarosław Mizera iD, Pasquale Cavaliere iD, Marek Szkodo iD

Materials · 18.08.2025 · 18 (16) · 3870

DOI: 10.3390/ma18163870 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.08.2025. Verfasst von Alicja Stanisławska und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering and Ship Technology, Gdansk University of Technology, Narutowicza 11/12, 80-233 Gdańsk, Poland. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the strain hardening and dislocation structure in the surface layers of C45 steel subjected to precision grinding at various depths. The aim was to assess how different grinding conditions influence the mechanical response and defect structure of ferrite. Nanoindentation was used to evaluate mechanical properties, while X-ray diffraction analysis provided data on the microstrain, crystallite size, and residual stress. The character and density of dislocations were further examined using modified Williamson–Hall and q-parameter analysis. The results revealed that the sample ground to a depth of 2 μm exhibited the highest density of statistically stored dislocations, as well as the lowest dislocation mobility. This condition also corresponded to the highest residual stresses and the greatest share of screw dislocations, indicating intense strain localization. In contrast, deeper grinding depths resulted in lower dislocation densities and reduced the strain energy. The observed trends highlight the formation of a dislocation-rich nanostructured layer in the shallowest ground region. These findings provide new insights into the mechanisms of surface hardening in ferritic steels and demonstrate how the depth of material removal during grinding governs the subsurface microstructure and strengthening effects.

Schlagwörter

Stichwörter der Autor:innen

C45 steeldislocation mobilitydislocation structuregrindingresidual stress

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering and Ship Technology, Gdansk University of Technology, Narutowicza 11/12, 80-233 Gdańsk, Poland.
  • Faculty of Materials Science and Engineering, Warsaw University of Technology, Wołoska 141, 02-507 Warsaw, Poland.
  • Department of Innovation Engineering, University of Salento, Via per Arnesano, 73100 Lecce, Italy.

ORCID-Profile: Jarosław Mizera, Pasquale Cavaliere, Marek Szkodo

Zitieren

APA

Stanisławska, A., Moszczyńska, D., Mizera, J., Cavaliere, P., & Szkodo, M. (2025). Impact of Grinding Depth on Dislocation Structures and Surface Hardening in C45 Steel. Materials, 18(16), 3870. https://doi.org/10.3390/ma18163870

Vancouver

Stanisławska A, Moszczyńska D, Mizera J, Cavaliere P, Szkodo M. Impact of Grinding Depth on Dislocation Structures and Surface Hardening in C45 Steel. Materials. 2025;18(16):3870. doi:10.3390/ma18163870

BibTeX
@article{Stanisawska2025,
  author = {Stanisławska, Alicja and Moszczyńska, Dorota and Mizera, Jarosław and Cavaliere, Pasquale and Szkodo, Marek},
  title = {Impact of Grinding Depth on Dislocation Structures and Surface Hardening in C45 Steel},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {16},
  pages = {3870},
  doi = {10.3390/ma18163870}
}
Kostenlos starten →