EUVIMEDEUVIMED entdecken
Crossref

The effect of the PCS feed method on the cleaning activity of the CSM during flat surface grinding

Ryszard Wójcik

Journal of Engineering 360 · 24.09.2025 · 1 (1/25) · 23-30

DOI: 10.5604/01.3001.0055.2802 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering 360, erschienen am 24.09.2025. Verfasst von Ryszard Wójcik. Die Arbeit nennt 23 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study presents a series of experiments focused on cleaning the active surface of a conventional grinding wheel using two methods of supplying the cooling and lubricating fluid with minimum consumption: MQL (Minimum Quantity Lubrication) and the flood method WET (wet machining) with an oil–water emulsion, during the process of plunge surface grinding in both up- and down-grinding modes. The tests were carried out on steel grade 1.4034 with a hardness of 55 HRC. A special design solution of the 38A60KV8 grinding wheel (Norton Poland) was proposed, which enabled observation of the behavior and deposition of contaminants on the sample surface. A methodology was developed for collecting contaminants on the surface of the ground material. The contaminants from the active surface of the grinding wheel (CPS) were weighed. The obtained results made it possible to assess the effectiveness of the investigated methods of supplying the cooling and lubricating fluid (PCS). In particular, it was found that perpendicular delivery of PCS supports the lubrication of the ground surface, positively affects the cutting forces by reducing friction, and consequently lowers the temperature in the machining zone, which in turn contributes to achieving a more favorable distribution of compressive stresses in the surface layer.”

Zitieren

APA

Wójcik, R. (2025). The effect of the PCS feed method on the cleaning activity of the CSM during flat surface grinding. Journal of Engineering 360, 1(1/25), 23-30. https://doi.org/10.5604/01.3001.0055.2802

Vancouver

Wójcik R. The effect of the PCS feed method on the cleaning activity of the CSM during flat surface grinding. Journal of Engineering 360. 2025;1(1/25):23-30. doi:10.5604/01.3001.0055.2802

BibTeX
@article{Wjcik2025,
  author = {Wójcik, Ryszard},
  title = {The effect of the PCS feed method on the cleaning activity of the CSM during flat surface grinding},
  journal = {Journal of Engineering 360},
  year = {2025},
  volume = {1},
  number = {1/25},
  pages = {23--30},
  doi = {10.5604/01.3001.0055.2802}
}
Kostenlos starten →