Influence of feed rate on surface roughness during machining and grinding of recovered blades
TechNoLogica · 26.06.2026 · 1 (2) · 39-44
DOI: 10.17268/tech1.2.2026.07 ↗Kurz gefasst
Fachartikel in der Zeitschrift TechNoLogica, online erschienen am 26.06.2026. Verfasst von Walter Zavaleta-Neira und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Grinding is a key process in industrial manufacturing for recovering components with high precision. This research evaluates the effect of longitudinal feed on surface roughness when grinding used AISI 1045 steel blades. An experimental design was implemented with three feed levels (0.01 mm/pass, 0.05 mm/pass and 0.10 mm/pass), keeping the cutting depth constant at 0.1 mm and the cutting speed at 30 m/s. The results show a significant increase in the average roughness (Ra) with increasing feed, from 1.20 μm to 3.56 μm, with a statistical validation of ANOVA (p < 0.001). This behavior is consistent with previous research highlighting the impact of feed on surface quality in various machining and grinding processes [5] [4] [1] [3] [2]; [6]
Zitieren
APA
Zavaleta-Neira, W., & Gamboa-Chapoñan, M. (2026). Influence of feed rate on surface roughness during machining and grinding of recovered blades. TechNoLogica, 1(2), 39-44. https://doi.org/10.17268/tech1.2.2026.07
Vancouver
Zavaleta-Neira W, Gamboa-Chapoñan M. Influence of feed rate on surface roughness during machining and grinding of recovered blades. TechNoLogica. 2026;1(2):39-44. doi:10.17268/tech1.2.2026.07
BibTeX
@article{ZavaletaNeira2026,
author = {Zavaleta-Neira, Walter and Gamboa-Chapoñan, Miguel},
title = {Influence of feed rate on surface roughness during machining and grinding of recovered blades},
journal = {TechNoLogica},
year = {2026},
volume = {1},
number = {2},
pages = {39--44},
doi = {10.17268/tech1.2.2026.07}
}
EUVIMED