Electrochemical micromachining of galvanized iron sheets: process optimization and performance evaluation
Journal of Electrochemical Science and Engineering · 31.07.2025 · 15 (6)
DOI: 10.5599/jese.2821 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Electrochemical Science and Engineering, online erschienen am 31.07.2025. Verfasst von Nadanasabapathi Sivashankar und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Electrochemical micromachining (ECMM) is a promising non-traditional technique for fabricating micro-features on conductive materials with high precision and minimal thermal effects. This study focuses on the ECMM of galvanized iron (GI) sheets using sodium nitrate (NaNO3) as the electrolyte. Key process parameters such as voltage, duty cycle, and electrolyte concentration were optimized to improve machining performance in terms of material removal rate (MRR) and overcut (OC). An L9 orthogonal array was used to design the experiments, and signal-to-noise ratio, along with analysis of variance (ANOVA), was employed to identify the most influential parameters. Results showed that voltage significantly influenced both MRR and OC, with optimal MRR observed at 12 V, 70 % duty cycle, and 20 g l-1 NaNO3 concentration. Conversely, the minimum OC was achieved at 6 V, 50 % duty cycle and 10 g l-1 NaNO3 electrolyte concentration. SEM analysis confirmed over-etched boundaries at higher voltage and well-defined micro-holes at lower voltage. This research demonstrates the critical role of parameter tuning in enhancing the quality and precision of ECMM on GI sheets.
Zitieren
APA
Sivashankar, N., Santhanam, K., Prasad, S., Jawahar, M., & Thanigaivelan, R. (2025). Electrochemical micromachining of galvanized iron sheets: process optimization and performance evaluation. Journal of Electrochemical Science and Engineering, 15(6). https://doi.org/10.5599/jese.2821
Vancouver
Sivashankar N, Santhanam K, Prasad S, Jawahar M, Thanigaivelan R. Electrochemical micromachining of galvanized iron sheets: process optimization and performance evaluation. Journal of Electrochemical Science and Engineering. 2025;15(6). doi:10.5599/jese.2821
BibTeX
@article{Sivashankar2025,
author = {Sivashankar, Nadanasabapathi and Santhanam, Kadhiresan and Prasad, Shikandar and Jawahar, Mamidala and Thanigaivelan, Rajasekaran},
title = {Electrochemical micromachining of galvanized iron sheets: process optimization and performance evaluation},
journal = {Journal of Electrochemical Science and Engineering},
year = {2025},
volume = {15},
number = {6},
doi = {10.5599/jese.2821}
}
EUVIMED