EUVIMEDEUVIMED entdecken
Crossref

Development of a Laser Induced Thermo-Electrochemical Micromachining Process Based on Lensed Fiber: Process Characteristics and Mechanisms

Tong Li, Yufeng Wang

Journal of The Electrochemical Society · 26.06.2026 · 173 (12) · 123501

DOI: 10.1149/1945-7111/ae7908 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 16.06.2026. Verfasst von Tong Li und 1 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Gefördert von: Strategic Priority Research Program of the Chinese Academy of Sciences, Key Research and Development Plan of Ningbo.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser and electrochemical machining (LECM) exhibits significant potential for high-efficiency, high-quality surface micromachining. However, its widespread application is hindered by constrained laser coupling efficiency and process instability, often stemming from uncontrollable laser intensity distribution and the requirement for external power sources. The present study proposed a method of lensed fiber-based chemical solution assisted laser processing (CALP). By utilizing a lensed fiber for laser transmission and focusing, the laser intensity in the machining zone is significantly localized and enhanced compared to conventional flat-end fibers. Furthermore, the energy density can be precisely regulated by modulating the machining gap. Numerical and experimental results demonstrate that the lensed fiber-based head reduces the laser intensity spread width by 54.2% while increasing the peak intensity by 307.2%. Compared to flat-end fiber processing, CALP with lensed fiber achieves an 84% increase in microgroove depth and a 32.3% reduction in width. Systematic investigations reveal that the microstructure dimensions can be further optimized by adjusting the laser power, feed rate, and multi-pass downward feeding strategies. The versatility of this method is validated on metallic substrates, including nickel-based superalloys and titanium alloys, culminating in the fabrication of functional large-area hydrophobic surfaces. Crucially, material removal is governed by the synergistic effects of direct laser ablation and self-induced thermo-electrochemical machining, with respective volume contributions of 25.87% and 71.43%. The electrochemical component is driven by the laser-induced potential difference across distinct zones, eliminating the need for an external voltage. This lensed fiber-based CALP provides a robust and controllable paradigm for high-precision surface microfabrication on metallic materials.

Förderung

  • Strategic Priority Research Program of the Chinese Academy of Sciences
  • Key Research and Development Plan of Ningbo

Zitieren

APA

Li, T., & Wang, Y. (2026). Development of a Laser Induced Thermo-Electrochemical Micromachining Process Based on Lensed Fiber: Process Characteristics and Mechanisms. Journal of The Electrochemical Society, 173(12), 123501. https://doi.org/10.1149/1945-7111/ae7908

Vancouver

Li T, Wang Y. Development of a Laser Induced Thermo-Electrochemical Micromachining Process Based on Lensed Fiber: Process Characteristics and Mechanisms. Journal of The Electrochemical Society. 2026;173(12):123501. doi:10.1149/1945-7111/ae7908

BibTeX
@article{Li2026,
  author = {Li, Tong and Wang, Yufeng},
  title = {Development of a Laser Induced Thermo-Electrochemical Micromachining Process Based on Lensed Fiber: Process Characteristics and Mechanisms},
  journal = {Journal of The Electrochemical Society},
  year = {2026},
  volume = {173},
  number = {12},
  pages = {123501},
  doi = {10.1149/1945-7111/ae7908}
}
Kostenlos starten →