EUVIMEDEUVIMED entdecken
Crossref

Tensile Response of Low-Carbon Steel Specimens across Different Thickness and Diameter Ranges

Franklin Taruyun Hudeardo Sinaga, Jandri Fan HT Saragi, Sahat, Suadi, Zumhari

Formosa Journal of Science and Technology · 31.10.2026 · 5 (10) · 2717-2730

DOI: 10.55927/fjst.v5i10.7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Formosa Journal of Science and Technology, online erschienen am 31.10.2026. Verfasst von Franklin Taruyun Hudeardo Sinaga und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tensile testing is widely used to characterize the mechanical response of metallic materials. This study analyzes the tensile response of low-carbon steel specimens across different thickness and diameter ranges based on experimental data obtained using a Universal Testing Machine. Three specimen groups were evaluated: flat plate specimens with thicknesses of 4, 6, 8, 10, 16, and 20 mm; plain reinforcing steel with nominal diameters of 8, 10, and 12 mm; and deformed reinforcing steel with nominal diameters of 10, 13, 16, 19, and 22 mm. Each dimensional group was tested three times. The analyzed parameters were yield strength, ultimate tensile strength (UTS), and elongation. The results showed that tensile response did not exhibit a uniform monotonic relationship with specimen thickness or diameter. Plate specimens produced UTS values of 400.58–523.20 MPa, plain reinforcing steel 517.52–538.43 MPa, and deformed reinforcing steel 596.99–674.43 MPa. The observed responses indicate that specimen size should be interpreted together with specimen type and geometry rather than as an isolated determinant of tensile properties

Zitieren

APA

Sinaga, F. T. H., Saragi, J. F. H., Sahat, Suadi, & Zumhari (2026). Tensile Response of Low-Carbon Steel Specimens across Different Thickness and Diameter Ranges. Formosa Journal of Science and Technology, 5(10), 2717-2730. https://doi.org/10.55927/fjst.v5i10.7

Vancouver

Sinaga FTH, Saragi JFH, Sahat, Suadi, Zumhari. Tensile Response of Low-Carbon Steel Specimens across Different Thickness and Diameter Ranges. Formosa Journal of Science and Technology. 2026;5(10):2717-2730. doi:10.55927/fjst.v5i10.7

BibTeX
@article{Sinaga2026,
  author = {Sinaga, Franklin Taruyun Hudeardo and Saragi, Jandri Fan HT and Sahat and Suadi and Zumhari},
  title = {Tensile Response of Low-Carbon Steel Specimens across Different Thickness and Diameter Ranges},
  journal = {Formosa Journal of Science and Technology},
  year = {2026},
  volume = {5},
  number = {10},
  pages = {2717--2730},
  doi = {10.55927/fjst.v5i10.7}
}
Kostenlos starten →