EUVIMEDEUVIMED entdecken
Crossref

Grain size enhancement and grain boundary thickness reduction in low‐carbon steel at sub re–crystalline temperatures via ultra low frequency electrical pulse assisted tensile deformation

G. A. Abeygunawardane, G. I. P. De Silva, T. Dhanushka, P. Priyankara, S. Rangana, S. Wishwakula, V. Nekouie, M. Skof

Materialwissenschaft und Werkstofftechnik · 2026-03 · 57 (3) · 221-242

DOI: 10.1002/mawe.70113 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materialwissenschaft und Werkstofftechnik, online erschienen am 06.05.2026. Verfasst von G. A. Abeygunawardane und 7 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tensile tests are conducted on specimens normalized at 900 °C, followed by the application of alternating current pulses at peak currents of 900 A and 1100 A. The resulting microstructural changes are analysed using metallographic techniques and a Python based image processing algorithm to quantify grain boundary thickness. A multiphysics based finite element analysis model developed in COMSOL Multiphysics facilitates the simulation of mechanical, thermal, and electromagnetic interactions during tensile loading. The results indicate that increasing electrical pulse frequency leads to a reduction in yield stress and an enhancement in ductility, peaking at approximately 0.83 Hz before declining due to fracture strain effects. While current amplitude and frequency primarily influenced failure strain, the reduction in grain boundary thickness cause by pulsed current and the associated dislocation movement significantly impacted yield and ductility properties. Statistical analysis confirms that grain boundary thicknesses in samples treated with pulsed currents were significantly lower compared to those in untreated samples. Additionally, temperature measurements indicate that these grain boundary reductions occur at strikingly low temperatures, well below the recrystallization temperature of the low carbon steel.

Zitieren

APA

Abeygunawardane, G. A., Silva, G. I. P. D., Dhanushka, T., Priyankara, P., Rangana, S., Wishwakula, S., Nekouie, V., & Skof, M. (2026). Grain size enhancement and grain boundary thickness reduction in low‐carbon steel at sub re–crystalline temperatures via ultra low frequency electrical pulse assisted tensile deformation. Materialwissenschaft und Werkstofftechnik, 57(3), 221-242. https://doi.org/10.1002/mawe.70113

Vancouver

Abeygunawardane GA, Silva GIPD, Dhanushka T, Priyankara P, Rangana S, Wishwakula S, et al. Grain size enhancement and grain boundary thickness reduction in low‐carbon steel at sub re–crystalline temperatures via ultra low frequency electrical pulse assisted tensile deformation. Materialwissenschaft und Werkstofftechnik. 2026;57(3):221-242. doi:10.1002/mawe.70113

BibTeX
@article{Abeygunawardane2026,
  author = {Abeygunawardane, G. A. and Silva, G. I. P. De and Dhanushka, T. and Priyankara, P. and Rangana, S. and Wishwakula, S. and Nekouie, V. and Skof, M.},
  title = {Grain size enhancement and grain boundary thickness reduction in low‐carbon steel at sub re–crystalline temperatures via ultra low frequency electrical pulse assisted tensile deformation},
  journal = {Materialwissenschaft und Werkstofftechnik},
  year = {2026},
  volume = {57},
  number = {3},
  pages = {221--242},
  doi = {10.1002/mawe.70113}
}
Kostenlos starten →