EFFICIENCY OF FACTORS AFFECTING THE PRODUCTIVITY OF SUCKER ROD PUMPS
PROCEEDINGS OF OCCUPATIONAL HEALTH & INDUSTRIAL SAFETY · 12.05.2026 · 60
DOI: 10.55858/prohis08022025-60 ↗Kurz gefasst
Fachartikel in der Zeitschrift PROCEEDINGS OF OCCUPATIONAL HEALTH & INDUSTRIAL SAFETY, online erschienen am 12.05.2026. Verfasst von Gulbahar Mammadova Gulbahar Mammadova und 1 weiteren Autor:innen.
Abstract (Originalsprache)
The article determines the key factors affecting the productivity of a deep-well pump, specifically the pumping speed ( number of oscillations), the travel path and the diameter of the plunger. It is known that in oil fields, many measures require the shut down operation of a deep-well pumps. However, such interruptions lead to some undesirable negative consequences. For example, losses in oil and gas production may cause the plunger to seize within the pump cylinder or lead the rod string failure. etc. For these reasons, it is advisible to avoid unnecessary well shut downs. The operating mode of the deep-well pump should be maintained constant,keeping the number of oscillations of the jacking machine per minute, the length of the plunger stroke lengh and the diameter of the pump are kept constant unchanged while monitoring, the depth of the liquid level in the well , and determining the oil and water flow rate. The pump submergence is selected to ensure maximum possible oil flow rate and the minimum water cut. At the same time, it is impossible to properly operate pump wells without determining the depth of the liquid level. That is, it is impossible to correctly apply them using hydrodynamic methods, determine optimal operating modes, and prevent complications and equipment failureswhich increase the number of repairs, and the cost of the produced oil and gas. Therefore, in order to obtain the intended productivity at great depths, it is necessary totransition to a long-stroke mode of pumping, which allows to apply small-diameter deep pumps. The submergence of the plunger pump below the dynamic liquid level in the well can be achieved by adjusting the pump's setting depth and changing the liquid flow rate of the well, i.e., the mode parameters or the diameter of the pump. Keywords: submersible pump, plunger, pumping speed, crankcase, stroke length, pump efficiency, rods, cylinder, plunger diameter.
Zitieren
APA
Mammadova, G. M. G., & Yusifova, F. Y. F. (2026). EFFICIENCY OF FACTORS AFFECTING THE PRODUCTIVITY OF SUCKER ROD PUMPS. PROCEEDINGS OF OCCUPATIONAL HEALTH & INDUSTRIAL SAFETY, 60. https://doi.org/10.55858/prohis08022025-60
Vancouver
Mammadova GMG, Yusifova FYF. EFFICIENCY OF FACTORS AFFECTING THE PRODUCTIVITY OF SUCKER ROD PUMPS. PROCEEDINGS OF OCCUPATIONAL HEALTH & INDUSTRIAL SAFETY. 2026:60. doi:10.55858/prohis08022025-60
BibTeX
@article{Mammadova2026,
author = {Mammadova, Gulbahar Mammadova Gulbahar and Yusifova, Fatimə Yusifova Fatimə},
title = {EFFICIENCY OF FACTORS AFFECTING THE PRODUCTIVITY OF SUCKER ROD PUMPS},
journal = {PROCEEDINGS OF OCCUPATIONAL HEALTH & INDUSTRIAL SAFETY},
year = {2026},
pages = {60},
doi = {10.55858/prohis08022025-60}
}
EUVIMED