Analytical calculation of contact pressure under thermoelastic deformation conditions in sucker rod pumps
SOCAR Proceedings · 2026 · (1) · 99-108
DOI: 10.5510/ogp20260101157 ↗Kurz gefasst
Fachartikel in der Zeitschrift SOCAR Proceedings, 2026. Verfasst von A. G. Huseynov und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).
Abstract (Originalsprache)
This study develops an analytical framework for evaluating contact pressure and wear in the plunger–cylinder pair of sucker rod pumps operating under thermoelastic deformation. The motivation arises from the sensitivity of sealing performance to clearance growth, where leakage increases approximately with the cube of the gap, making wear control crucial for long-term pump efficiency. Several existing plunger concepts are reviewed, with emphasis on the adverse role of mechanical impurities (mainly sand) that degrade sealing and intensify hydroabrasive wear. To mitigate this effect, a modified plunger design is proposed in which the end heads contain variable-diameter annular projections. These elements promote rapid fragmentation of abrasive particles in the entrance zones of the pair, reducing the probability of damaging contact and facilitating the passage of fine particles through the clearance. The contact problem is formulated by incorporating the thermoelastic radial displacements of both the plunger and the barrel into the primary compatibility condition. The unknown contact pressure is expanded into trigonometric series and determined through algebraization, with reduced linear systems solved numerically. Using the obtained pressure field, the temperature distribution in the contact region and the radial (linear) wear function ℎ(θ, t) are calculated for different plunger velocities and surface roughness conditions. The results demonstrate pronounced non-uniformity at low contact pressures and a trend toward more uniform wear as contact intensifies. The proposed structural solution and the developed calculations provide practical guidance for improving the durability and operational efficiency of sucker rod pumps. Keywords: sucker rod pump; thermoelastic deformation; plunger-cylinder pair; contact pressure; hydroabrasive wear.
Zitieren
APA
Huseynov, A. G., & Huseynzade, M. B. (2026). Analytical calculation of contact pressure under thermoelastic deformation conditions in sucker rod pumps. SOCAR Proceedings, 99-108. https://doi.org/10.5510/ogp20260101157
Vancouver
Huseynov AG, Huseynzade MB. Analytical calculation of contact pressure under thermoelastic deformation conditions in sucker rod pumps. SOCAR Proceedings. 2026:99-108. doi:10.5510/ogp20260101157
BibTeX
@article{Huseynov2026,
author = {Huseynov, A. G. and Huseynzade, M. B.},
title = {Analytical calculation of contact pressure under thermoelastic deformation conditions in sucker rod pumps},
journal = {SOCAR Proceedings},
year = {2026},
number = {1},
pages = {99--108},
doi = {10.5510/ogp20260101157}
}
EUVIMED