EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Surface characteristics of montmorillonite reinforced cellulose membranes derived from pineapple waste

Naufal Rizky AMASDA, Heru SURYANTO, Aminnudin AMINUDDIN, Uun YANUHAR, Nanda Lidya Cinta Aulia SARI, Agus SUYETNO, Komarudin KOMARUDIN, Fajar NUSANTARA, Gaguk JATISUKAMTO, Aulia Surya RAMADHAN

Journal of Metals, Materials and Minerals · 09.06.2026 · 36 (3) · e2521

DOI: 10.55713/jmmm.v36i3.2521 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Metals, Materials and Minerals, online erschienen am 09.06.2026. Verfasst von Naufal Rizky AMASDA und 9 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to investigate the effect of montmorillonite on the surface characteristics and porosity of bacterial nanocellulose (BNC) membranes derived from pineapple peel waste. The bacterial cellulose was synthesized using Acetobacter xylinum using pineapple peel extract as medium component. Bacterial nanocellulose membrane (BNC) was obtained by crushing and homogenizing bacterial cellulose in a high-pressure homogenizer. BNC membrane was reinforced with montmorillonite content of 2 wt% to 8 wt%. The membrane was characterized for its properties using SEM, FTIR, surface roughness tester, tensile tester, water holding capacity test, and BET analysis. The results showed that montmorillonite was well-dispersed within BNC matrix but exhibited agglomeration at higher concentrations. When the samples were analyzed using FTIR spectroscopy, observed changes in functional groups and molecular interactions at 2845 cm‒1 Alkane C‒H bond, confirming that components were successfully integrated. The surface roughness increased significantly from 28.33 ± 3.35 μm (control) to 82.23 ± 1.82 μm (8 wt% montmorillonite), confirming morphological change. The addition of montmorillonite has reduced the crystalline index and the mechanical properties of BNC membrane. BET analysis revealed a transition from microporous (1.6979 nm) to mesoporous structures (up to 2 nm) with enhanced surface area and pore diameter. Pore diameter and volume correlated with enhancing water holding capacity by 36.6% at montmorillonite content of 6 wt%. BC/montmorillonite membranes exhibit adjustable surface characteristics and porosity, thus providing potential for water treatment applications.

Zitieren

APA

AMASDA, N. R., SURYANTO, H., AMINUDDIN, A., YANUHAR, U., SARI, N. L. C. A., SUYETNO, A., KOMARUDIN, K., NUSANTARA, F., JATISUKAMTO, G., & RAMADHAN, A. S. (2026). Surface characteristics of montmorillonite reinforced cellulose membranes derived from pineapple waste. Journal of Metals, Materials and Minerals, 36(3), e2521. https://doi.org/10.55713/jmmm.v36i3.2521

Vancouver

AMASDA NR, SURYANTO H, AMINUDDIN A, YANUHAR U, SARI NLCA, SUYETNO A, et al. Surface characteristics of montmorillonite reinforced cellulose membranes derived from pineapple waste. Journal of Metals, Materials and Minerals. 2026;36(3):e2521. doi:10.55713/jmmm.v36i3.2521

BibTeX
@article{AMASDA2026,
  author = {AMASDA, Naufal Rizky and SURYANTO, Heru and AMINUDDIN, Aminnudin and YANUHAR, Uun and SARI, Nanda Lidya Cinta Aulia and SUYETNO, Agus and KOMARUDIN, Komarudin and NUSANTARA, Fajar and JATISUKAMTO, Gaguk and RAMADHAN, Aulia Surya},
  title = {Surface characteristics of montmorillonite reinforced cellulose membranes derived from pineapple waste},
  journal = {Journal of Metals, Materials and Minerals},
  year = {2026},
  volume = {36},
  number = {3},
  pages = {e2521},
  doi = {10.55713/jmmm.v36i3.2521}
}
Kostenlos starten →