Characterization of 3D printable Polyethylene Terephthalate Glycol composite filament reinforced with agricultural waste derived from pineapple plant
Journal of Reinforced Plastics and Composites · 2025-12 · 44 (23-24) · 2812-2824
DOI: 10.1177/07316844241263897 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Reinforced Plastics and Composites, online erschienen am 18.07.2024. Verfasst von Jitendra Kumar und 3 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 40 Literaturangaben.
Abstract (Originalsprache)
The aim of the current research is to develop a 3D printable PETG composite filament reinforced with pineapple fiber particulate (PALF-P). These filaments were produced using an extrusion technique, incorporating varying weight percentages (1.5%, 2.5%, 5%, and 7.5%) of PALF particles treated with a 5% NaOH chemical solution. Analytical techniques like Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Diffraction (XRD) evaluated the impact of this treatment. A comprehensive study of the resulting composite filaments’ mechanical and physical attributes revealed improved cohesion between the PETG matrix and PALF particles, enhancing the overall properties. Specifically, the incorporation of 5 wt % PALF particles showed the highest ultimate tensile strength (53.54 ± 2.7 MPa), Young’s modulus (1443 ± 72.22 MPa), and load-bearing capacity (104.97 ± 5.25 N). In contrast, 2.5% of particles had the least noticeable effect on mechanical properties. Moreover, the developed sustainable composite filament showed significant promise in advancing bio-composites through additive manufacturing, potentially contributing to sustainable manufacturing practices.
Zitieren
APA
Kumar, J., Mishra, V., Kumar, A., & Negi, S. (2025). Characterization of 3D printable Polyethylene Terephthalate Glycol composite filament reinforced with agricultural waste derived from pineapple plant. Journal of Reinforced Plastics and Composites, 44(23-24), 2812-2824. https://doi.org/10.1177/07316844241263897
Vancouver
Kumar J, Mishra V, Kumar A, Negi S. Characterization of 3D printable Polyethylene Terephthalate Glycol composite filament reinforced with agricultural waste derived from pineapple plant. Journal of Reinforced Plastics and Composites. 2025;44(23-24):2812-2824. doi:10.1177/07316844241263897
BibTeX
@article{Kumar2025,
author = {Kumar, Jitendra and Mishra, Vishal and Kumar, Avinash and Negi, Sushant},
title = {Characterization of 3D printable Polyethylene Terephthalate Glycol composite filament reinforced with agricultural waste derived from pineapple plant},
journal = {Journal of Reinforced Plastics and Composites},
year = {2025},
volume = {44},
number = {23-24},
pages = {2812--2824},
doi = {10.1177/07316844241263897}
}
EUVIMED