EUVIMEDEUVIMED entdecken
Crossref

The Use of Cu-W Sinters in MIG-MAG Welding Contact Tips for Improved Continuous Wire Abrasion Performance

Mustafa YAZAR, Şükrü TALAŞ

Journal of Materials and Mechatronics: A · 2023

DOI: 10.55546/jmm.1198415 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Materials and Mechatronics: A, 2023. Verfasst von Mustafa YAZAR und 1 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Gefördert von: ŞAHİNKUL MAKİNA AR-GE MERKEZİ.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Gas metal arc welding is one of the most widely used welding methods in the industry. Especially when large volume welded manufacturing is required, this method is very successful and practical. The wear of the contact guides, which guide the wire at the tip of the welding torches, but most importantly, provide electrical current transmission, may cause the production time to be extended and the calibration period to be minimized. In this study, the most worn part of the contact guides used in the Gas Welding robots were assembled by making pins from doped and undoped copper powders using the powder metallurgy method. The wear performance was compared by making the obtained pin driven contact guides under mass production conditions. In the study, pressing and sintering processes were carried out with Cu and Cu+W powders. The hardness of the contact guides was characterized by their microstructure and XRD results. It was observed that CuW5 and CuW10 powder mixtures were more successful.

Förderung

  • ŞAHİNKUL MAKİNA AR-GE MERKEZİ

Zitieren

APA

YAZAR, M., & TALAŞ, Ş. (2023). The Use of Cu-W Sinters in MIG-MAG Welding Contact Tips for Improved Continuous Wire Abrasion Performance. Journal of Materials and Mechatronics: A. https://doi.org/10.55546/jmm.1198415

Vancouver

YAZAR M, TALAŞ Ş. The Use of Cu-W Sinters in MIG-MAG Welding Contact Tips for Improved Continuous Wire Abrasion Performance. Journal of Materials and Mechatronics: A. 2023. doi:10.55546/jmm.1198415

BibTeX
@article{YAZAR2023,
  author = {YAZAR, Mustafa and TALAŞ, Şükrü},
  title = {The Use of Cu-W Sinters in MIG-MAG Welding Contact Tips for Improved Continuous Wire Abrasion Performance},
  journal = {Journal of Materials and Mechatronics: A},
  year = {2023},
  doi = {10.55546/jmm.1198415}
}
Kostenlos starten →