Characteristics and Corrosion Behavior of Sinter-Aluminized P/M Steels
Journal of Materials and Mechatronics: A · 2022
DOI: 10.55546/jmm.1129943 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Materials and Mechatronics: A, 2022. Verfasst von Selvin TURGUT. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 35 Literaturangaben.
Abstract (Originalsprache)
In this study, the effects of different cold pressing pressures and sintering mediums on microstructure, micro hardness, and corrosion behavior of steels produced by powder metallurgy (PM) method from Distaloy SA powders, were examined. The PM samples were first subjected to two different cold pressing pressures being 150 MPa and 200 MPa, then to the sintering process in two different sintering mediums as aluminum and argon, for 5 hours at 1000°C. The densities and surface roughness of sinter-aluminized and only sintered samples were measured, and it was determined that their densities were increasing by the increase of cold pressing pressure and that their roughness was decreasing by the increase of cold pressing pressure. The determination of microstructural characteristics of PM samples was performed by the use of X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) devices. Corrosion tests were electrochemically conducted in 3.5 wt.% NaCl solution. It was determined that sinter-aluminized samples showed higher corrosion resistance than samples sintered in argon medium depending on the FexAly phases forming on the sinter-aluminized samples. Thus, the sinter-aluminizing process is promising for using PM materials in corrosive environments.
Zitieren
APA
TURGUT, S. (2022). Characteristics and Corrosion Behavior of Sinter-Aluminized P/M Steels. Journal of Materials and Mechatronics: A. https://doi.org/10.55546/jmm.1129943
Vancouver
TURGUT S. Characteristics and Corrosion Behavior of Sinter-Aluminized P/M Steels. Journal of Materials and Mechatronics: A. 2022. doi:10.55546/jmm.1129943
BibTeX
@article{TURGUT2022,
author = {TURGUT, Selvin},
title = {Characteristics and Corrosion Behavior of Sinter-Aluminized P/M Steels},
journal = {Journal of Materials and Mechatronics: A},
year = {2022},
doi = {10.55546/jmm.1129943}
}
EUVIMED