Canola Meal Adhesive for the Production of Wood Fiber Insulation Boards Using Hot-Air/Hot-Steam-Process
Journal of Materials Science Research · 2021
DOI: 10.5539/jmsr.v10n1p28 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Materials Science Research, 2021. Verfasst von Kolja Ostendorf und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Canola meal as a by-product from the vegetable oil production provides a protein-rich material which is available in large quantities but with limited areas for application. The objective of this study was to investigate the possibility of utilizing canola meal adhesive for the production of wood fiber insulation boards (WFI) using the hot-air/hot-steam-process. WFI with two different thicknesses (40/60 mm) and different densities (110/140/160/180 kg/m³) were manufactured. The testing focused on their physical-mechanical properties such as internal bond strength (IB), compressive strength (CS) and short-term water absorption (ST-WA) measured according to European standards. For a better understanding of the material and curing dynamics, the canola meal was analyzed on its protein content, lignin and pentosane content as well as its extractives content using hot water, cold water and successive extraction. Using a canola meal based adhesive resulted in promising results for IB and CS up to density of 140 kg/m³. Nonetheless, there is place for improvement for the ST-WA.
Zitieren
APA
Ostendorf, K., Haerkötter, J., & Euring, M. (2021). Canola Meal Adhesive for the Production of Wood Fiber Insulation Boards Using Hot-Air/Hot-Steam-Process. Journal of Materials Science Research. https://doi.org/10.5539/jmsr.v10n1p28
Vancouver
Ostendorf K, Haerkötter J, Euring M. Canola Meal Adhesive for the Production of Wood Fiber Insulation Boards Using Hot-Air/Hot-Steam-Process. Journal of Materials Science Research. 2021. doi:10.5539/jmsr.v10n1p28
BibTeX
@article{Ostendorf2021,
author = {Ostendorf, Kolja and Haerkötter, Julian and Euring, Markus},
title = {Canola Meal Adhesive for the Production of Wood Fiber Insulation Boards Using Hot-Air/Hot-Steam-Process},
journal = {Journal of Materials Science Research},
year = {2021},
doi = {10.5539/jmsr.v10n1p28}
}
EUVIMED