TriboFusion: A Multi-Parameter SurfacePerformance Index for Comparative Evaluation of Heat-Treated, Nitrided, Chromized and Boronized Steel Surfaces under Sliding Wear
Journal of Data Science and Information Technology · 2024
DOI: 10.55124/jdit.v1i2.284 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Data Science and Information Technology, 2024. Verfasst von Ramamurthy Narasimhan.
Abstract (Originalsprache)
Heat treatment, nitriding, chromizing, and boronizing are the most common surface engineering techniques to improve the tribological performance of steel components operating under severe sliding conditions. Although the surface hardness, wear resistance and frictional behavior are improved by these treatments, their effectiveness depends on the working conditions, the characteristics of the diffusion layer, the surface roughness and the resulting microstructure. The present study presents an indepth comparison of the tribological behavior of heat-treated, nitrided, chromized and boronized steel surfaces, which are obtained conventionally from the same starting material. The treated specimens were characterized by microhardness testing, surface roughness analysis, optical microscopy, scanning electron microscopy and elemental characterization techniques. The tribological performance is evaluated by calculating the coefficient of friction, wear rate, material loss, wear-track depth and the dominant wear mechanisms (adhesive wear, abrasive wear, oxidation, delamination and microcracking) under comparable testing conditions. We propose a Multi-Parameter Surface Performance Index (MSPI) which combines multiple mechanical, microstructural, geometrical and tribological properties into one quantitative performance index. This framework, called TriboFusion, aims to enable objective comparison of different surface-treatment techniques. The proposed framework normalizes heterogeneous experimental measurements and applies a weighted aggregation strategy to rank the overall performance of each surface treatment. Conventional methods evaluate tribological properties based on individual parameters (hardness, wear rate). TriboFusion takes into account a set of interacting tribological properties at once, thus providing a more holistic evaluation. The proposed methodology provides a systematic decision-support tool for the selection of the most suitable surface-treatment process for engineering components such as bearings, pumps, valves, sleeves, rods and couplings used in the automotive, manufacturing, mining, and oil and gas industries. The framework is computationally efficient, generic and easily adaptable to other surface engineering technologies.
Zitieren
APA
Narasimhan, R. (2024). TriboFusion: A Multi-Parameter SurfacePerformance Index for Comparative Evaluation of Heat-Treated, Nitrided, Chromized and Boronized Steel Surfaces under Sliding Wear. Journal of Data Science and Information Technology. https://doi.org/10.55124/jdit.v1i2.284
Vancouver
Narasimhan R. TriboFusion: A Multi-Parameter SurfacePerformance Index for Comparative Evaluation of Heat-Treated, Nitrided, Chromized and Boronized Steel Surfaces under Sliding Wear. Journal of Data Science and Information Technology. 2024. doi:10.55124/jdit.v1i2.284
BibTeX
@article{Narasimhan2024,
author = {Narasimhan, Ramamurthy},
title = {TriboFusion: A Multi-Parameter SurfacePerformance Index for Comparative Evaluation of Heat-Treated, Nitrided, Chromized and Boronized Steel Surfaces under Sliding Wear},
journal = {Journal of Data Science and Information Technology},
year = {2024},
doi = {10.55124/jdit.v1i2.284}
}
EUVIMED