Designing combinations of technical and technological factors that ensure the efficiency of drilling operations at great depths
SOCAR Proceedings · 2026 · (SI1) · 23-31
DOI: 10.5510/ogp2026si101171 ↗Kurz gefasst
Fachartikel in der Zeitschrift SOCAR Proceedings, 2026. Verfasst von R. A. Hasanov und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Study of rock failure under excessive pressure drawdown is associated with the lack of an effective flushing system design. In this process, the filtration rate of drilling fluid through the bottomhole plays a key role. The pressure drawdown effect is fully realized when the rate of penetration exceeds the fluid filtration rate in both destruction and pre-destruction zones. If the penetration rate is equal to or lower than the filtration rate, the effect becomes only partial. The efficiency of a drill bit largely depends on the performance of its hydraulic system. The main criterion is the ability to promptly remove drilled cuttings from the bottomhole zone. To achieve effective cleaning, the flushing system must direct the drilling fluid, after reflecting from the bottomhole surface, toward the central channel of the bit. Such a flow pattern – from the periphery to the center – ensures efficient removal of accumulated cuttings. Various drill bit designs are currently used in well construction, making it important to evaluate their effectiveness under comparable rock destruction conditions. The primary performance indicator is the rate of penetration, defined as the volume of rock drilled per unit time. Deep well drilling practice shows that significant energy losses occur during transmission to the bottomhole due to depth. Under such conditions, abrasive-cutting tools are the most effective, providing high penetration rates with minimal energy consumption. Additionally, penetration per single impact is a critical parameter for selecting optimal drilling modes and ensuring maximum efficiency. This approach improves drilling performance, reliability, and overall operational stability. Keywords: wells, mechanical model, centrifugal force, drilling, ball velocity, fluid viscosity, washing channel, graphical solution.
Zitieren
APA
Hasanov, R. A., & Gasimova, J. R. (2026). Designing combinations of technical and technological factors that ensure the efficiency of drilling operations at great depths. SOCAR Proceedings, 23-31. https://doi.org/10.5510/ogp2026si101171
Vancouver
Hasanov RA, Gasimova JR. Designing combinations of technical and technological factors that ensure the efficiency of drilling operations at great depths. SOCAR Proceedings. 2026:23-31. doi:10.5510/ogp2026si101171
BibTeX
@article{Hasanov2026,
author = {Hasanov, R. A. and Gasimova, J. R.},
title = {Designing combinations of technical and technological factors that ensure the efficiency of drilling operations at great depths},
journal = {SOCAR Proceedings},
year = {2026},
number = {SI1},
pages = {23--31},
doi = {10.5510/ogp2026si101171}
}
EUVIMED