Bullheading Drilling Operations: Understanding Anomalous Gas Displacement Efficiency
SPE Journal · 13.05.2026 · 31 (05) · 2929-2948
DOI: 10.2118/228232-pa ↗Kurz gefasst
Fachartikel in der Zeitschrift SPE Journal, online erschienen am 16.03.2026. Verfasst von Hazem Fleifel und 3 weiteren Autor:innen. Die Arbeit nennt 69 Literaturangaben.
Abstract (Originalsprache)
Bullheading process is a well-kill approach that is used as an alternative method during harsh drilling situations where traditional well control operations present a limited capacity. The process involves pumping liquid from the top of a drilling well, at the liquid injection rate (Qw) high enough to push down the uprising gas influx back into the formation without circulating it out to the surface, experiencing cocurrent and countercurrent two-phase flow in the annulus. Understanding gas displacement mechanisms and the resulting gas removal efficiency (Reff) is a key to optimize the operation. The conventional thought is based on the simple belief that the Reff increases with increasing liquid injection rate (i.e., higher Reff at higher Qw). By performing (i) simulation and model fits to large-scale experimental data (about 1,900 ft deep well) from LSU PERTT laboratory and (ii) small lab-scale experiments (6-ft-tall vertical tube with 1 in. diameter) with visualization capacity, this study proves for the first time that the Reff increases with Qw (i.e., dReff/dQw > 0) when Qw is relatively low or high, but decreases with Qw (i.e., dReff/dQw < 0) when Qw is in between. This anomalous behavior, reminiscent of multivalued folding solution surface in catastrophe theory with unstable region surrounded by two adjacent stable regions, is shown to coincide with flow regime change from mist/annular to slug and, finally, to bubbly flow regime. Although this new finding has a significant implication in bullheading field operations, further investigations with dimensionless numbers and in annulus geometry require future studies.
Zitieren
APA
Fleifel, H., Cepeda-Salgado, B., Tyagi, M., & Kam, S. I. (2026). Bullheading Drilling Operations: Understanding Anomalous Gas Displacement Efficiency. SPE Journal, 31(05), 2929-2948. https://doi.org/10.2118/228232-pa
Vancouver
Fleifel H, Cepeda-Salgado B, Tyagi M, Kam SI. Bullheading Drilling Operations: Understanding Anomalous Gas Displacement Efficiency. SPE Journal. 2026;31(05):2929-2948. doi:10.2118/228232-pa
BibTeX
@article{Fleifel2026,
author = {Fleifel, Hazem and Cepeda-Salgado, Betty and Tyagi, Mayank and Kam, Seung Ihl},
title = {Bullheading Drilling Operations: Understanding Anomalous Gas Displacement Efficiency},
journal = {SPE Journal},
year = {2026},
volume = {31},
number = {05},
pages = {2929--2948},
doi = {10.2118/228232-pa}
}
EUVIMED