Development of Alkali-Activated Artificial Aggregates Utilizing E-Waste
INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT · 13.04.2026 · 10 (04) · 1-9
DOI: 10.55041/ijsrem60115 ↗Kurz gefasst
Fachartikel in der Zeitschrift INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT, online erschienen am 13.04.2026. Verfasst von Mohd. Abdul Rehman und 6 weiteren Autor:innen.
Abstract (Originalsprache)
- The global construction industry faces a critical shortage of natural aggregates due to the unsustainable rate of quarrying, leading to severe ecological degradation. Simultaneously, the rapid accumulation of electronic waste, particularly the non-metallic fraction (NMF) of printed circuit boards, presents a significant environmental challenge as these materials are traditionally non-biodegradable and difficult to recycle. This research aims to investigate the technical feasibility of synthesizing alkali-activated artificial aggregates by repurposing the non-metallic fraction of printed circuit boards and fly ash. The study is based on the hypothesis that the chemical synergy between the aluminosilicate precursors in fly ash and the glass-fiber-reinforced epoxy structure of NMF can produce a geopolymer matrix with mechanical properties comparable to natural crushed aggregates. To evaluate this, a systematic investigation was carried out involving the activation of precursors with an 8M sodium hydroxide and sodium silicate binary solution ( SS/SH of 2.5:1), followed by a dual-stage ambient and thermal curing regime at 100°C. The experimental results demonstrate that the 75-25 and 50-50 FA-EW formulations achieved Aggregate Impact Values of 24.44% and 22.30%, respectively, alongside Los Angeles Abrasion values ranging from 22.75% to 27.11%. These findings indicate that the synthesized aggregates comfortably satisfy standard requirements for road base and sub-base applications, which typically mandate limits below 30%. This work provides a technically robust and energy-efficient solution for diverting hazardous electronic waste from landfills while simultaneously addressing the global scarcity of natural construction aggregates through the principles of a circular economy. Key Words: E-waste, Fly Ash, Geopolymerization, Artificial Aggregates, Sustainability.
Zitieren
APA
Rehman, M. A., Mehare, N., Gangawane, D., Ganjare, D., Hate, K., Bhamore, Y., & Shaikh, S. (2026). Development of Alkali-Activated Artificial Aggregates Utilizing E-Waste. INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT, 10(04), 1-9. https://doi.org/10.55041/ijsrem60115
Vancouver
Rehman MA, Mehare N, Gangawane D, Ganjare D, Hate K, Bhamore Y, et al. Development of Alkali-Activated Artificial Aggregates Utilizing E-Waste. INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT. 2026;10(04):1-9. doi:10.55041/ijsrem60115
BibTeX
@article{Rehman2026,
author = {Rehman, Mohd. Abdul and Mehare, Nishikant and Gangawane, Divya and Ganjare, Disha and Hate, Kasturi and Bhamore, Yash and Shaikh, Sufiyan},
title = {Development of Alkali-Activated Artificial Aggregates Utilizing E-Waste},
journal = {INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT},
year = {2026},
volume = {10},
number = {04},
pages = {1--9},
doi = {10.55041/ijsrem60115}
}
EUVIMED