EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of Alkali-Activated Porous Concrete Composition from Slag Waste

Gintautas Tamošaitis, Danute Vaičiukynienė iD, Tomas Jaskaudas, Jurate Mockiene, Darius Pupeikis iD

Materials · 06.02.2023 · 16 (4) · 1360

DOI: 10.3390/ma16041360 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.02.2023. Verfasst von Gintautas Tamošaitis und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Architecture and Civil Engineering, Kaunas University of Technology, Studentų st. 48, 51367 Kaunas, Lithuania. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, a porous alkali-activated slag concrete was developed that can be used in the construction sector as a sustainable building material and potentially as an alternative to the aerated concrete products currently on the market. Ferrous slag from the metallurgical industry (Finland) and phosphogypsum from a fertilizer plant (Lithuania) were used as precursors in alkali-activated systems. The addition of hydrogen peroxide and phosphogypsum led to positive changes in the final properties of the test material. Porous concrete based on alkali-activated slag was analyzed by X-ray diffraction (XRD), Fourier transform infrared (FTIR) and scanning electron microscopy (SEM) methods. The compressive strength, density, thermal conductivity and porosity of the hardened specimens were evaluated as well. Research is being conducted with the material in question to create a cheap, particularly low-energy demanding building material. This material must have suitable mechanical properties for the structure and, at the same time, suitable thermal conductivity properties. It was determined that this porous concrete had compressive strength in the range of 2.12–7.95 MPa, density from 830 kg/m3 to 1142 kg/m3, and thermal conductivity in the range of 0.0985–0.2618 W/(m·K). The results indicate that the recommended content of phosphogypsum in alkali-activated material is 3–5% due to the optimal distribution of the mechanical and thermal properties and the conductivity. Alkali-activated slag and phosphogypsum material can be used in the manufacture of low-strength insulation blocks and to protect structures from the effects of high temperatures.

Schlagwörter

Stichwörter der Autor:innen

alkali-activated slagphosphogypsumporous concretethermal conductivity

Autor:innen und Institutionen

  • Faculty of Architecture and Civil Engineering, Kaunas University of Technology, Studentų st. 48, 51367 Kaunas, Lithuania.

ORCID-Profile: Danute Vaičiukynienė, Darius Pupeikis

Zitieren

APA

Tamošaitis, G., Vaičiukynienė, D., Jaskaudas, T., Mockiene, J., & Pupeikis, D. (2023). Development of Alkali-Activated Porous Concrete Composition from Slag Waste. Materials, 16(4), 1360. https://doi.org/10.3390/ma16041360

Vancouver

Tamošaitis G, Vaičiukynienė D, Jaskaudas T, Mockiene J, Pupeikis D. Development of Alkali-Activated Porous Concrete Composition from Slag Waste. Materials. 2023;16(4):1360. doi:10.3390/ma16041360

BibTeX
@article{Tamoaitis2023,
  author = {Tamošaitis, Gintautas and Vaičiukynienė, Danute and Jaskaudas, Tomas and Mockiene, Jurate and Pupeikis, Darius},
  title = {Development of Alkali-Activated Porous Concrete Composition from Slag Waste},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {4},
  pages = {1360},
  doi = {10.3390/ma16041360}
}
Kostenlos starten →