Examining the Cutting Forces in Turning of AISI 316 Steel using Taguchi Approach
International Journal of Science, Strategic Management and Technology · 13.05.2026 · 02 (05) · 1
DOI: 10.55041/ijsmt.v2i5.231 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Science, Strategic Management and Technology, online erschienen am 13.05.2026. Verfasst von Rohit Srivastava und 1 weiteren Autor:innen.
Abstract (Originalsprache)
AISI 316 stainless steel is frequently turned in manufacturing because of its mechanical qualities, strength, and resistance to corrosion. AISI 316 stainless steel's high work-hardening tendency and low thermal conductivity make machining challenging and lead to higher cutting forces, tool wear, and machining performance. Improving the machining parameters to increase turning efficiency Taguchi optimization is used to study how machining parameters affect the cutting force of AISI 316 stainless steel turning. The experiments were chosen based on the depth of cut, feed rate, and cutting speed. The Taguchi L9 orthogonal arrays reduce the number of experimental trials and improve the analysis for three levels per parameter. A dynamometer was used in turning experiments to measure cutting forces under carefully regulated machining conditions.
Zitieren
APA
Srivastava, R., & Vashishtha, S. (2026). Examining the Cutting Forces in Turning of AISI 316 Steel using Taguchi Approach. International Journal of Science, Strategic Management and Technology, 02(05), 1. https://doi.org/10.55041/ijsmt.v2i5.231
Vancouver
Srivastava R, Vashishtha S. Examining the Cutting Forces in Turning of AISI 316 Steel using Taguchi Approach. International Journal of Science, Strategic Management and Technology. 2026;02(05):1. doi:10.55041/ijsmt.v2i5.231
BibTeX
@article{Srivastava2026,
author = {Srivastava, Rohit and Vashishtha, Shubhangini},
title = {Examining the Cutting Forces in Turning of AISI 316 Steel using Taguchi Approach},
journal = {International Journal of Science, Strategic Management and Technology},
year = {2026},
volume = {02},
number = {05},
pages = {1},
doi = {10.55041/ijsmt.v2i5.231}
}
EUVIMED