EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-response optimization of TIG dissimilar welding of AISI 1008 mild steel and AISI 316 stainless steel using grey-based Taguchi method

Okwudili Simeon Ogbonna, Stephen Akinlabi Akinlabi, Nkosinathi Madushele, Olawale Samuel Fatoba, Esther Titilayo Akinlabi

The International Journal of Advanced Manufacturing Technology · 2023-05 · 126 (1-2) · 749-758

DOI: 10.1007/s00170-023-11080-2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 03.03.2023. Verfasst von Okwudili Simeon Ogbonna und 4 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Johannesburg.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents a reliable method of multi-performance characteristics optimization of TIG dissimilar welding of mild steel and stainless steel. Grey-integrated Taguchi optimization approach was adopted for the optimization of the welding process parameters such as the welding current, the welding voltage and the gas flow rate for multi-performance characteristics such as the ultimate tensile strength, yield strength, percentage elongation and Vickers microhardness of the fusion zone. L 9 Taguchi orthogonal array was employed with three process parameters all at three levels. The welding current was the most significant process parameter for the multi-performance characteristics of the weld joint. The optimal setting for the multi-performance characteristics of the weld joint was obtained as welding current at level 1 (110 A), welding voltage at level 1 (11 V) and gas flow rate at level 3 (18 l min −1 ). The corresponding response variables at the optimal setting were ultimate tensile strength, yield strength, percentage elongation and Vickers microhardness of 493.29 MPa, 395.38 MPa, 31.35% and 390.52 HV respectively. These values are all found to be higher than the values obtained at the initial settings. This shows that grey-integrated Taguchi optimization is an effective method in multi-performance characteristics optimization of dissimilar welded material.

Förderung

  • University of Johannesburg

Zitieren

APA

Ogbonna, O. S., Akinlabi, S. A., Madushele, N., Fatoba, O. S., & Akinlabi, E. T. (2023). Multi-response optimization of TIG dissimilar welding of AISI 1008 mild steel and AISI 316 stainless steel using grey-based Taguchi method. The International Journal of Advanced Manufacturing Technology, 126(1-2), 749-758. https://doi.org/10.1007/s00170-023-11080-2

Vancouver

Ogbonna OS, Akinlabi SA, Madushele N, Fatoba OS, Akinlabi ET. Multi-response optimization of TIG dissimilar welding of AISI 1008 mild steel and AISI 316 stainless steel using grey-based Taguchi method. The International Journal of Advanced Manufacturing Technology. 2023;126(1-2):749-758. doi:10.1007/s00170-023-11080-2

BibTeX
@article{Ogbonna2023,
  author = {Ogbonna, Okwudili Simeon and Akinlabi, Stephen Akinlabi and Madushele, Nkosinathi and Fatoba, Olawale Samuel and Akinlabi, Esther Titilayo},
  title = {Multi-response optimization of TIG dissimilar welding of AISI 1008 mild steel and AISI 316 stainless steel using grey-based Taguchi method},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2023},
  volume = {126},
  number = {1-2},
  pages = {749--758},
  doi = {10.1007/s00170-023-11080-2}
}
Kostenlos starten →