EUVIMEDEUVIMED entdecken
Crossref

Structural Analysis and Design of a 220 kV Single-Circuit Transmission Line Tower Using STAAD.Pro under Wind and Seismic Loading Conditions

Dr. T.Siva Sankar Reddy, . Madhav B

International Journal of Creative and Open Research in Engineering and Management · 11.06.2026 · 02 (06) · 1-9

DOI: 10.55041/ijcope.v2i6.128 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Creative and Open Research in Engineering and Management, online erschienen am 11.06.2026. Verfasst von Dr. T.Siva Sankar Reddy und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The transmission tower plays an essential role in electrical power generation and transmission since it supports the conductor and provides clearances at long spans. As the need for power increases, structural integrity of such towers becomes increasingly critical. The aim of this paper is to carry out analysis and design of a 220 kV self-supporting single-circuit lattice steel transmission tower using the software STAAD.Pro. In order to perform such analysis, wind loads have been determined by referring to IS 875 (Part 3) – Wind zone III (wind speed = 44m/s). This gives us the total horizontal wind load as 130.35 kN. Also, seismic forces have been determined according to IS 1893 – seismic zone II, giving a value of design base shear as 12.43 kN. With an acceptable nodal displacement of 6.20 mm at the tower tip (with the maximum allowable value being 290 mm or H/100), leg members will experience the highest compressive load of 615 kN. The member utilization factor is 0.82, and all other members have lower utilization factors, showing structural adequacy. Modal analysis showed that the first natural frequency is 5.00 Hz (T=0.20 s), meaning the tower is stiff enough without any possibility of resonance during service. It was observed that the wind load controlled the design parameters as compared to the seismic load. The designed tower structure has been proven to meet the requirements of IS 802, IS 875 (Part 3), IS 1893, IS 800, among others.

Zitieren

APA

Reddy, D. T. S., & B, M. (2026). Structural Analysis and Design of a 220 kV Single-Circuit Transmission Line Tower Using STAAD.Pro under Wind and Seismic Loading Conditions. International Journal of Creative and Open Research in Engineering and Management, 02(06), 1-9. https://doi.org/10.55041/ijcope.v2i6.128

Vancouver

Reddy DTS, B M. Structural Analysis and Design of a 220 kV Single-Circuit Transmission Line Tower Using STAAD.Pro under Wind and Seismic Loading Conditions. International Journal of Creative and Open Research in Engineering and Management. 2026;02(06):1-9. doi:10.55041/ijcope.v2i6.128

BibTeX
@article{Reddy2026,
  author = {Reddy, Dr. T.Siva Sankar and B, . Madhav},
  title = {Structural Analysis and Design of a 220 kV Single-Circuit Transmission Line Tower Using STAAD.Pro under Wind and Seismic Loading Conditions},
  journal = {International Journal of Creative and Open Research in Engineering and Management},
  year = {2026},
  volume = {02},
  number = {06},
  pages = {1--9},
  doi = {10.55041/ijcope.v2i6.128}
}
Kostenlos starten →