Impact toughness of high-chromium martensitic steel with low nitrogen and high boron content
Materials. Technologies. Design · 30.06.2026 · 8 (2(25)) · 75-83
DOI: 10.54708/26587572_2026_822575 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials. Technologies. Design, erschienen am 30.06.2026. Verfasst von Anastasia Sergeevna Dolzhenko und 7 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben.
Abstract (Originalsprache)
This paper examines the impact response of a novel high‑chromium martensitic steel alloyed with 0.0007 wt.% nitrogen and 0.015 wt.% boron over a broad temperature interval. The heat‑treated microstructure consists of tempered martensite laths (mean width 320±30 nm) with a dislocation density of 1.5×1014 m−2 and no δ‑ferrite. Secondary phases include M23C6 carbides (~70 nm average), sporadic M6C, and fine NbX precipitates. At ambient temperature, the impact toughness exceeds 200 J/cm², well above the standards for boiler and turbine applications. The ductile‑to‑brittle transition temperature (defined as the midpoint between upper and lower shelf energies) is 0 °C. Above –20 °C, the crack initiation energy becomes virtually constant at 60±7 J, whereas the propagation energy rises steadily owing to growing ductile fracture contribution. Fractographic observations show that with increasing temperature the stable crack growth region widens and the unstable propagation zone shrinks, vanishing completely at 60 °C. The combination of high room-temperature toughness (~200 J/cm²) and a transition temperature of about 0 °C makes this 10Cr–3Co–0.2Re steel with low N and high B a promising candidate for ultra-supercritical steam power-plant components.
Zitieren
APA
Dolzhenko, A. S., Brazhnikov, I. S., Lugovskaya, A. S., Tuchina, K. S., Dudko, V. A., Dudova, N. R., Tkachev, E. S., & Fedoseeva, A. E. (2026). Impact toughness of high-chromium martensitic steel with low nitrogen and high boron content. Materials. Technologies. Design, 8(2(25)), 75-83. https://doi.org/10.54708/26587572_2026_822575
Vancouver
Dolzhenko AS, Brazhnikov IS, Lugovskaya AS, Tuchina KS, Dudko VA, Dudova NR, et al. Impact toughness of high-chromium martensitic steel with low nitrogen and high boron content. Materials. Technologies. Design. 2026;8(2(25)):75-83. doi:10.54708/26587572_2026_822575
BibTeX
@article{Dolzhenko2026,
author = {Dolzhenko, Anastasia Sergeevna and Brazhnikov, Ivan Sergeevich and Lugovskaya, Anna Sergeevna and Tuchina, Ksenia Sergeevna and Dudko, Valery Aleksandrovich and Dudova, Nadezhda Ruzilevna and Tkachev, Evgeny Sergeevich and Fedoseeva, Alexandra Eduardovna},
title = {Impact toughness of high-chromium martensitic steel with low nitrogen and high boron content},
journal = {Materials. Technologies. Design},
year = {2026},
volume = {8},
number = {2(25)},
pages = {75--83},
doi = {10.54708/26587572_2026_822575}
}
EUVIMED