EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tailored Hardening and Isothermal Bainitizing of Additively Manufactured Nitrogen‐Enhanced Martensitic Chromium Steel

Philip König, Sebastian Weber, Jonathan Lentz

steel research international · 14.05.2026

DOI: 10.1002/srin.70530 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 14.05.2026. Verfasst von Philip König und 2 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: BMWK.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the influence of tailored heat‐treatment strategies on phase constitution, hardness, and microstructure of a high‐nitrogen (N) martensitic chromium (Cr) steel processed by laser powder bed fusion (PBF‐LB/M). Previous alloy modifications to X50CrMoV15 enhanced N solubility during gas atomization and enabled crack‐free processing. However, the resulting predominantly austenitic as‐built microstructure requires post‐treatment to achieve application‐relevant properties. Three heat‐treatment routes were examined: (1) hardening and tempering, (2) hardening combined with cryogenic treatment, and (3) austenitizing followed by isothermal bainitizing. Thermodynamic calculations were used to assess austenitizing temperatures by evaluating carbide and nitride dissolution. Austenitizing between 900°C and 1150°C showed a strong dependence of hardness and retained austenite on interstitial C + N content. The highest hardness, 652 ± 8 HV10 with 6 ± 1 vol.% retained austenite, was achieved by following route 1 at 1000°C. Bainitizing at 250°C after austenitizing at 1000°C produced 681 ± 5 HV10 with 8 ± 1 vol.% retained austenite. Scanning electron microscope (SEM) analysis revealed ultrafine bainitic structures with 20–50 nm subunits and nanoscale precipitates. The combination of low‐temperature transformation and nanoscale refinement explains the high hardness, showing that isothermal bainitizing is a promising postprocessing route for N‐alloyed Cr steels produced by PBF‐LB/M.

Förderung

  • BMWK

Zitieren

APA

König, P., Weber, S., & Lentz, J. (2026). Tailored Hardening and Isothermal Bainitizing of Additively Manufactured Nitrogen‐Enhanced Martensitic Chromium Steel. steel research international. https://doi.org/10.1002/srin.70530

Vancouver

König P, Weber S, Lentz J. Tailored Hardening and Isothermal Bainitizing of Additively Manufactured Nitrogen‐Enhanced Martensitic Chromium Steel. steel research international. 2026. doi:10.1002/srin.70530

BibTeX
@article{Knig2026,
  author = {König, Philip and Weber, Sebastian and Lentz, Jonathan},
  title = {Tailored Hardening and Isothermal Bainitizing of Additively Manufactured Nitrogen‐Enhanced Martensitic Chromium Steel},
  journal = {steel research international},
  year = {2026},
  doi = {10.1002/srin.70530}
}
Kostenlos starten →