Development of Monograph to Estimate Actual Rotor Speed for a Given Nut Exit Velocity in a Centrifugal Nut Cracker
Applied Research and Innovation · 2023
DOI: 10.54536/ari.v1i1.1742 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Research and Innovation, 2023. Verfasst von Ubong Edet Assian und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In an attempt to shorten the computational procedure to estimate actual rotor speed for any given nut exit impinging velocity in a centrifugal nutcracker; a Monograph was developed using experimental data, analytical, and systematic approaches. The result showed that direct reading of actual rotor disc speed in rpm corresponding to any chosen nut exit velocity from any given rotor disc radius was achieved based on theoretical rotor speed. T-test comparing actual rotor disc speeds in rpm from the Monograph and model Equation 12 showed no statistically significant difference at 5% level of probability. Therefore, the developed Monograph is reasonably good for predicting the actual rotor disc speed in rpm required during nut cracking operation in a centrifugal nutcracker.
Zitieren
APA
Assian, U. E., Olosunde, W. A., & Antia, O. O. (2023). Development of Monograph to Estimate Actual Rotor Speed for a Given Nut Exit Velocity in a Centrifugal Nut Cracker. Applied Research and Innovation. https://doi.org/10.54536/ari.v1i1.1742
Vancouver
Assian UE, Olosunde WA, Antia OO. Development of Monograph to Estimate Actual Rotor Speed for a Given Nut Exit Velocity in a Centrifugal Nut Cracker. Applied Research and Innovation. 2023. doi:10.54536/ari.v1i1.1742
BibTeX
@article{Assian2023,
author = {Assian, Ubong Edet and Olosunde, William Adebisi and Antia, Okon Orua},
title = {Development of Monograph to Estimate Actual Rotor Speed for a Given Nut Exit Velocity in a Centrifugal Nut Cracker},
journal = {Applied Research and Innovation},
year = {2023},
doi = {10.54536/ari.v1i1.1742}
}
EUVIMED