Mechanical Characteristics of Pineapple Leaf Fiber and E-Glass Hybrid Composites as an Alternative for Boat Hulls
Applied Science and Technology on Naval Engineering · 14.08.2026 · 4 (2) · 12-19
DOI: 10.54378/astne.v4i2v2.02 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Science and Technology on Naval Engineering, online erschienen am 14.08.2026. Verfasst von Mohammad Arbeel Falaah und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The transition toward sustainable and eco-friendly materials in the maritime sector has accelerated research into natural fiber-reinforced composites as potential alternatives to conventional structural materials. This study rigorously evaluates the mechanical characteristics of a hybrid sandwich composite structure, strategically incorporating Pineapple Leaf Fiber (PALF) as the core and E-Glass fiberglass as the outer skins. The composite matrix utilizes an epoxy resin modified with 1 gram of Aerosil nanofiller to enhance interfacial adhesion and resin viscosity. To optimize the fiber-matrix compatibility, the PALF was subjected to varying concentrations of alkaline treatment using Sodium Hydroxide (NaOH) solutions at 0%, 5%, 10%, and 15% for a duration of 2 hours. The fabrication of the test specimens was conducted using the hand lay-up method, ensuring uniform resin distribution and minimizing void formation. Comprehensive mechanical characterizations were performed, including tensile testing in accordance with the ASTM D3039 standard and flexural testing following the ASTM D7264 standard. The experimental results unveiled a distinct bell-shaped performance curve for tensile strength relative to the NaOH concentration. The optimal Ultimate Tensile Strength (UTS) was achieved at the 10% NaOH variation, recording a peak value of 77.33 MPa. This substantial enhancement is attributed to the optimal delignification process, which increased fiber surface roughness and promoted mechanical interlocking without damaging the cellulose structure. Conversely, the 15% NaOH treatment led to a significant degradation of the cellulose microfibrils, plummeting the UTS to 34.00 MPa. In contrast, the flexural test results demonstrated that the maximum Ultimate Flexural Strength (UFS) occurred in the untreated (0% NaOH) variation at 115.00 MPa, with the 10% NaOH variation closely following at 108.33 MPa. This behavior indicates that the flexural properties of the sandwich composite are predominantly governed by the high-stiffness E-Glass outer skins rather than the core material. Finally, the structural viability of the composites was assessed against the stringent regulations established by the Indonesian Bureau of Classification (BKI) for small-to-medium fiberglass boat hulls, which mandate a minimum tensile strength of 43.12 MPa. The findings confirm that only the 10% NaOH treated hybrid composite successfully surpasses this regulatory threshold, rendering it a highly promising and sustainable alternative material for marine hull construction.
Zitieren
APA
Falaah, M. A., & Marasabessy, A. (2026). Mechanical Characteristics of Pineapple Leaf Fiber and E-Glass Hybrid Composites as an Alternative for Boat Hulls. Applied Science and Technology on Naval Engineering, 4(2), 12-19. https://doi.org/10.54378/astne.v4i2v2.02
Vancouver
Falaah MA, Marasabessy A. Mechanical Characteristics of Pineapple Leaf Fiber and E-Glass Hybrid Composites as an Alternative for Boat Hulls. Applied Science and Technology on Naval Engineering. 2026;4(2):12-19. doi:10.54378/astne.v4i2v2.02
BibTeX
@article{Falaah2026,
author = {Falaah, Mohammad Arbeel and Marasabessy, Amir},
title = {Mechanical Characteristics of Pineapple Leaf Fiber and E-Glass Hybrid Composites as an Alternative for Boat Hulls},
journal = {Applied Science and Technology on Naval Engineering},
year = {2026},
volume = {4},
number = {2},
pages = {12--19},
doi = {10.54378/astne.v4i2v2.02}
}
EUVIMED