Sustainability-Driven Investigation of Mechanical, Morphological, and Spectroscopic Characteristics of Epoxy Pineapple Leaf Fiber–Glass Fiber Hybrid Composites Reinforced with Surface-Modified Montmorillonite Nanoclay
Journal of Composites Science · 18.11.2026 · 10 (11) · 619
DOI: 10.3390/jcs10110619 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 18.11.2026. Verfasst von Dharanendra Yachenahalli Thimmegowda und 5 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The current study aims to investigate the mechanical, morphological and spectroscopic characteristics of epoxy-based hybrid composites reinforced by pineapple leaf fiber (PALF) and glass fiber (GF) with the addition of surface-modified montmorillonite nanoclay. Surface modification of pineapple leaf fibers was carried out via treatment with a 3 wt.% NaOH solution for 60 min. The symmetrically stacked G-P-G-P-G-P-G composites reinforced by 45 wt.% of GF and PALF were manufactured using the technique of hand lay-up and subsequent compression molding. The concentration of added nanoclay amounted to 1, 3, and 5 wt.%, and mechanical stirring combined with ultrasonication was used to ensure its even distribution in the epoxy matrix. The results suggest a substantial increase in tensile strength and Young’s modulus for the composite with 1 wt.% nanoclay (by about 31% and 18%, respectively). A performance deterioration tendency could be observed when increasing the concentration of nanoclay because of stress concentration resulting from the formation of agglomerations. Analysis of density showed improvement of packing and reduction in the void fraction in composites with lower nanoclay content. FESEM micrographs showed better bonding between phases, decreased pull-out of fibers and increased crack deflection rate. FTIR spectra verified polymer–nanoclay interaction, indicating agglomeration at higher nanoclay concentrations.
Zitieren
APA
Thimmegowda, D. Y., Kakunje, M., Markunti, G. B., Kuppusamy, L., Ambekar, A. M., & Hindi, J. (2026). Sustainability-Driven Investigation of Mechanical, Morphological, and Spectroscopic Characteristics of Epoxy Pineapple Leaf Fiber–Glass Fiber Hybrid Composites Reinforced with Surface-Modified Montmorillonite Nanoclay. Journal of Composites Science, 10(11), 619. https://doi.org/10.3390/jcs10110619
Vancouver
Thimmegowda DY, Kakunje M, Markunti GB, Kuppusamy L, Ambekar AM, Hindi J. Sustainability-Driven Investigation of Mechanical, Morphological, and Spectroscopic Characteristics of Epoxy Pineapple Leaf Fiber–Glass Fiber Hybrid Composites Reinforced with Surface-Modified Montmorillonite Nanoclay. Journal of Composites Science. 2026;10(11):619. doi:10.3390/jcs10110619
BibTeX
@article{Thimmegowda2026,
author = {Thimmegowda, Dharanendra Yachenahalli and Kakunje, Muralishwara and Markunti, Gurumurthy Bethur and Kuppusamy, Lakshmi and Ambekar, Amar Murthy and Hindi, Jamaluddin},
title = {Sustainability-Driven Investigation of Mechanical, Morphological, and Spectroscopic Characteristics of Epoxy Pineapple Leaf Fiber–Glass Fiber Hybrid Composites Reinforced with Surface-Modified Montmorillonite Nanoclay},
journal = {Journal of Composites Science},
year = {2026},
volume = {10},
number = {11},
pages = {619},
doi = {10.3390/jcs10110619}
}
EUVIMED