EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

The effect of Curing time and temperature on Cathodic Disbondment Behavior of Epoxy-Coated Steel in Marine Environments

Rafaa M. R. Esmaael, Dawod H. Elabar, Mohamed A. Gebril, Farag Haidar

Al-Mukhtar Journal of Engineering Research · 17.04.2026 · 8 (1) · 51-64

DOI: 10.54172/cc55tn56 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Al-Mukhtar Journal of Engineering Research, online erschienen am 17.04.2026. Verfasst von Rafaa M. R. Esmaael und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Protecting steel structures from corrosion in various environments typically involves coating and cathodic protection. Multiple factors affect the rate at which a coating disbonds, including curing time, temperature, surface preparation, and coating thickness. Numerous research studies have investigated the mechanisms behind blister formation and growth. This study focuses on how the curing temperature affects the number of blisters, blister diameters, and disbanded steel coated with a 100µm epoxy resin. The results show that as the curing time increases for cathodically protected and unprotected samples, the time taken for initial disbonding is prolonged. It is worth noting that the blistering time is longer in polarized samples than in non-polarized ones, regardless of the curing temperature. In addition, blister formation is less frequent in polarized samples than non-polarised ones. As the curing temperature increases, the disbonding area decreases in protected and cathodically unprotected conditions. It has been observed that the size of blisters decreases with higher curing temperatures in protected samples. At the same time, it increases with rising cure temperatures when the system is in protection mode. Notably, the disbonding rates in unprotected samples exceed those in protected samples at all curing temperatures.

Zitieren

APA

Esmaael, R. M. R., Elabar, D. H., Gebril, M. A., & Haidar, F. (2026). The effect of Curing time and temperature on Cathodic Disbondment Behavior of Epoxy-Coated Steel in Marine Environments. Al-Mukhtar Journal of Engineering Research, 8(1), 51-64. https://doi.org/10.54172/cc55tn56

Vancouver

Esmaael RMR, Elabar DH, Gebril MA, Haidar F. The effect of Curing time and temperature on Cathodic Disbondment Behavior of Epoxy-Coated Steel in Marine Environments. Al-Mukhtar Journal of Engineering Research. 2026;8(1):51-64. doi:10.54172/cc55tn56

BibTeX
@article{Esmaael2026,
  author = {Esmaael, Rafaa M. R. and Elabar, Dawod H. and Gebril, Mohamed A. and Haidar, Farag},
  title = {The effect of Curing time and temperature on Cathodic Disbondment Behavior of Epoxy-Coated Steel in Marine Environments},
  journal = {Al-Mukhtar Journal of Engineering Research},
  year = {2026},
  volume = {8},
  number = {1},
  pages = {51--64},
  doi = {10.54172/cc55tn56}
}
Kostenlos starten →