EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Corrosion behavior of scratched coated steel structures in marine atmospheric environments

Wenbo Li, Zhengxu Zhao

AIP Advances · 01.06.2026 · 16 (6)

DOI: 10.1063/5.0323960 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AIP Advances, online erschienen am 12.06.2026. Verfasst von Wenbo Li und 1 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Equipment Development Department of the Central Military Commission.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To examine the corrosion behavior of scratched coatings in marine atmospheric environments, this study developed a multiphysics coupling model to evaluate the effects of scratch geometry (linear, circular, elliptical, and cross-shaped), defect size, temperature, and relative humidity. The simulations indicate dual-stage kinetic effects of temperature and humidity. In the initial stage, higher temperatures enhanced ionic diffusion and accelerated the onset of substrate corrosion, while higher humidity increased electrolyte film thickness and promoted mass transfer. Over longer exposure, enhanced transport also promoted the formation of oxidation products, increasing surface coverage and inhibiting sustained substrate corrosion. Consequently, the predicted substrate corrosion thickness decreased with increasing temperature and humidity over the one-year simulation period, whereas coating thickness reduction increased. Geometry strongly affected localized corrosion. For cross-shaped scratches, the corrosion rate decreased as the intersection angle increased. Among the representative geometries, linear scratches showed the lowest substrate corrosion risk, while elliptical and circular defects produced higher localized corrosion intensity. Elliptical scratches exhibited the highest temperature sensitivity (−3.31%/°C), followed by linear (−2.86%/°C) and circular (−1.29%/°C) scratches. Humidity sensitivity was highest for linear scratches (−5.54%/%RH), followed by elliptical (−5.33%/%RH) and circular (−4.10%/%RH) scratches.

Förderung

  • Equipment Development Department of the Central Military Commission

Zitieren

APA

Li, W., & Zhao, Z. (2026). Corrosion behavior of scratched coated steel structures in marine atmospheric environments. AIP Advances, 16(6). https://doi.org/10.1063/5.0323960

Vancouver

Li W, Zhao Z. Corrosion behavior of scratched coated steel structures in marine atmospheric environments. AIP Advances. 2026;16(6). doi:10.1063/5.0323960

BibTeX
@article{Li2026,
  author = {Li, Wenbo and Zhao, Zhengxu},
  title = {Corrosion behavior of scratched coated steel structures in marine atmospheric environments},
  journal = {AIP Advances},
  year = {2026},
  volume = {16},
  number = {6},
  doi = {10.1063/5.0323960}
}
Kostenlos starten →