High-Density Polyethylene/Kaolin Clay Composites: Optimization of The In-jection Moulding Process Parameters Towards Minimum Shrinkage and Warpage
Al-Mukhtar Journal of Engineering Research · 2024
DOI: 10.54172/3tm3e547 ↗Kurz gefasst
Fachartikel in der Zeitschrift Al-Mukhtar Journal of Engineering Research, 2024. Verfasst von Abd Alraouf Treesh und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Optimization of the injection moulding process parameters of thermoplastic composites made of high-density polyethylene (HDPE) and kaolin clay (KC) was carried out using the Taguchi method. The parameters that were taken into consideration were melting temperature, packing pressure and packing time. Composites containing 98 wt% of HDPE and 2wt% of KC with various particle sizes of
Zitieren
APA
Treesh, A. A., Elhrari, W., & Etmimi, H. (2024). High-Density Polyethylene/Kaolin Clay Composites: Optimization of The In-jection Moulding Process Parameters Towards Minimum Shrinkage and Warpage. Al-Mukhtar Journal of Engineering Research. https://doi.org/10.54172/3tm3e547
Vancouver
Treesh AA, Elhrari W, Etmimi H. High-Density Polyethylene/Kaolin Clay Composites: Optimization of The In-jection Moulding Process Parameters Towards Minimum Shrinkage and Warpage. Al-Mukhtar Journal of Engineering Research. 2024. doi:10.54172/3tm3e547
BibTeX
@article{Treesh2024,
author = {Treesh, Abd Alraouf and Elhrari, Wael and Etmimi, Hussein},
title = {High-Density Polyethylene/Kaolin Clay Composites: Optimization of The In-jection Moulding Process Parameters Towards Minimum Shrinkage and Warpage},
journal = {Al-Mukhtar Journal of Engineering Research},
year = {2024},
doi = {10.54172/3tm3e547}
}
EUVIMED