Microstructural Characterization of Aluminium Scrap Reinforced with Pulverized Cow Bone Particles Produced through Stir Casting
IPS Journal of Engineering and Technology · 06.07.2026 · 2 (1) · 236-241
DOI: 10.54117/k99dcg43 ↗Kurz gefasst
Fachartikel in der Zeitschrift IPS Journal of Engineering and Technology, online erschienen am 06.07.2026. Verfasst von Stan Chinweike Ekenyem und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The increasing demand for lightweight, cost-effective, and environmentally sustainable engineering materials has stimulated research into the development of aluminium matrix composites reinforced with bio-derived materials. This study investigates the microstructural characteristics of aluminium scrap reinforced with pulverized cow bone particles produced through the stir casting technique. Cow bones obtained from an abattoir were cleaned, degreased using acetone, sun-dried, pulverized, and processed into reinforcement particles. The pulverized cow bone particles were incorporated into molten aluminium scrap at reinforcement levels of 5, 10, 15, 20, 25, and 30 wt.% using stir casting. Microstructural examination was carried out using optical microscopy to evaluate the distribution of reinforcement particles, interfacial bonding, porosity, and other structural features of the developed composites. The micrographs revealed a relatively uniform distribution of cow bone particles within the aluminium matrix, indicating effective particle dispersion during stirring. Improved interfacial bonding between the matrix and reinforcement was observed with increasing reinforcement content, while only minimal porosity and limited particle agglomeration were detected in most of the composite samples. The unreinforced aluminium sample exhibited localized deformation features and a comparatively less refined microstructure than the reinforced composites. Furthermore, the presence of cow bone particles contributed to grain refinement and enhanced load-transfer capability within the composite matrix. The results demonstrate that pulverized cow bone particles can serve as effective and sustainable reinforcement materials for recycled aluminium composites. The combination of aluminium scrap and cow bone particles offers a viable approach for the development of low-cost, environmentally friendly composites suitable for engineering applications.
Zitieren
APA
Ekenyem, S. C., Nwobi-Okoye, C. C., Onyenanu, I. U., Amanfo, C. C., Ekenyem, J. A., & Arinze, C. V. (2026). Microstructural Characterization of Aluminium Scrap Reinforced with Pulverized Cow Bone Particles Produced through Stir Casting. IPS Journal of Engineering and Technology, 2(1), 236-241. https://doi.org/10.54117/k99dcg43
Vancouver
Ekenyem SC, Nwobi-Okoye CC, Onyenanu IU, Amanfo CC, Ekenyem JA, Arinze CV. Microstructural Characterization of Aluminium Scrap Reinforced with Pulverized Cow Bone Particles Produced through Stir Casting. IPS Journal of Engineering and Technology. 2026;2(1):236-241. doi:10.54117/k99dcg43
BibTeX
@article{Ekenyem2026,
author = {Ekenyem, Stan Chinweike and Nwobi-Okoye, C. C. and Onyenanu, Ifeanyichukwu Ugochukwu and Amanfo, Christian Chisom and Ekenyem, Judith Adamma and Arinze, Chimezie Vincent},
title = {Microstructural Characterization of Aluminium Scrap Reinforced with Pulverized Cow Bone Particles Produced through Stir Casting},
journal = {IPS Journal of Engineering and Technology},
year = {2026},
volume = {2},
number = {1},
pages = {236--241},
doi = {10.54117/k99dcg43}
}
EUVIMED