Microstructural, mechanical, and tribological evaluation of Al7075 reinforced with B4C and graphene particulates produced by stir casting
Journal of Composite Materials · 28.06.2026
DOI: 10.1177/00219983261465766 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composite Materials, online erschienen am 28.06.2026. Verfasst von Rumalla Haranath und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 58 Literaturangaben.
Abstract (Originalsprache)
This study investigated the mechanical and tribological properties of Al7075 alloy reinforced with B4C and graphene particles, processed through stir casting. It focused on incorporating a constant 5wt% Boron Carbide and varying graphene concentrations (1 to 4wt%) into the Al7075 matrix. Microstructural analysis was conducted using optical microscopy and Scanning Electron Microscopy, revealing finer grains, a reduction in grain size and the formation of a homogeneous dispersion of particles in Al7075 composites. Al7075/5wt.%B4C/4 wt.% graphene composite achieved the maximum ultimate tensile strength (UTS) of 421.77 MPa and Brinell hardness of 129.3 HB. Additionally, the tribological performance of the composites was assessed, with a wear rate of 0.0093 mm 3 /m recorded for the Al7075/5wt% B4C/3wt% graphene composite, demonstrating improved wear resistance. Magnesium, oxygen, and traces of silicon were detected through the EDS analysis. The detection of oxygen shows that the formation of an oxide, and the silicon detected has been derived from the composition of the alloy Al7075. Overall, this study provides valuable insights into the development of cost-effective, high-performance composites suitable for industrial applications.
Zitieren
APA
Haranath, R., Saheb, K. M., Sri, M. N. S., & Sivasundar, V. (2026). Microstructural, mechanical, and tribological evaluation of Al7075 reinforced with B4C and graphene particulates produced by stir casting. Journal of Composite Materials. https://doi.org/10.1177/00219983261465766
Vancouver
Haranath R, Saheb KM, Sri MNS, Sivasundar V. Microstructural, mechanical, and tribological evaluation of Al7075 reinforced with B4C and graphene particulates produced by stir casting. Journal of Composite Materials. 2026. doi:10.1177/00219983261465766
BibTeX
@article{Haranath2026,
author = {Haranath, Rumalla and Saheb, Koppanati Meera and Sri, Movva Naga Swapna and Sivasundar, Vijayakumar},
title = {Microstructural, mechanical, and tribological evaluation of Al7075 reinforced with B4C and graphene particulates produced by stir casting},
journal = {Journal of Composite Materials},
year = {2026},
doi = {10.1177/00219983261465766}
}
EUVIMED