Development of an Injection Nozzle Heating System to Produce Automotive Control Cables
Journal of Mechanical Engineering and Manufacturing · 2025
DOI: 10.53941/jmem.2025.100001 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Mechanical Engineering and Manufacturing, 2025. Verfasst von João Pedro Madureira Pinto und 4 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The automotive industry plays a vital role in the global economy, significantly contributing through job creation, resource utilization, and driving technical and technological advancements. Control cables play an indispensable role in various vehicle mechanisms, including the control of windows, doors, and critical functions such as the handbrake and throttle. The terminals attached to these control cables are small, die-cast components, most commonly fabricated from light alloys with low melting temperatures, such as the zinc-based alloy Zamak. One of the key challenges encountered in the production of these terminals is the difficulty in maintaining consistent heating of the injection nozzle, which can hinder the smooth removal of parts from the mold. This research proposes an innovative method to improve the heating of injection nozzles used in the manufacturing of zamak control cable terminals by employing electromagnetic induction. Typically, the heating process is conducted using electrical resistors, which lack precision in temperature regulation and respond slowly to fluctuations in nozzle temperature. The solution introduced in this study involves an induction heating system, tuned to operate at 155 kHz and 410 W of power. The system’s design features a multi-coil solenoid inductor, optimal for cylindrical components, and incorporates a pyrometer for continuous temperature monitoring. Finite Element Method (FEM) analysis revealed that maintaining an injection nozzle temperature of 550 °C requires the surrounding injection set to reach 600 °C. The return on investment for implementing this induction heating technology was calculated to be around 7 years and 8 months.
Zitieren
APA
Pinto, J. P. M., Campilho, R. D. S. G., Silva, F. J. G. D., Kirgiz, M. S., & Salwin, M. (2025). Development of an Injection Nozzle Heating System to Produce Automotive Control Cables. Journal of Mechanical Engineering and Manufacturing. https://doi.org/10.53941/jmem.2025.100001
Vancouver
Pinto JPM, Campilho RDSG, Silva FJGD, Kirgiz MS, Salwin M. Development of an Injection Nozzle Heating System to Produce Automotive Control Cables. Journal of Mechanical Engineering and Manufacturing. 2025. doi:10.53941/jmem.2025.100001
BibTeX
@article{Pinto2025,
author = {Pinto, João Pedro Madureira and Campilho, Raul Duarte Salgueiral Gomes and Silva, Francisco José Gomes da and Kirgiz, Mehmet Serkan and Salwin, Mariusz},
title = {Development of an Injection Nozzle Heating System to Produce Automotive Control Cables},
journal = {Journal of Mechanical Engineering and Manufacturing},
year = {2025},
doi = {10.53941/jmem.2025.100001}
}
EUVIMED