EUVIMEDEUVIMED entdecken
Crossref

Multi-Objective Optimization of EDM Process Parameters in Machining SAE 1015 Mild Steel: A Taguchi-DOE Approach

Sushil Kumar Nirvan

Natural Resources for Human Health · 02.11.2026 · 6 (21s)

DOI: 10.53365/nrfhh.4374 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Natural Resources for Human Health, online erschienen am 02.11.2026. Verfasst von Sushil Kumar Nirvan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrical discharge machining (EDM) can cut any electrically conductive material regardless of its hardness, but low-carbon steels such as SAE 1015 have seldom been examined in a systematic way. Here, the influence of source voltage (A), discharge current (B), pulse-on time (C) and pulse-off time (D) on material removal rate (MRR) and surface roughness (Ra) is investigated for die-sinking EDM of SAE 1015 mild steel with a graphite electrode. Experiments followed a nine-run Taguchi-based plan, and the data were processed in Minitab 17 through signal-to-noise (S/N) ratios, analysis of variance (ANOVA) and linear regression. Discharge current emerged as the dominant factor for both responses. For surface roughness it was the only statistically significant factor (p = 0.017; 39.7% of total variation). The regression model returned R2 = 89.9% and adjusted R2 = 79.9%, yet its leave-one-out predicted R2 was negative, so the model should be read as descriptive and not predictive. The best S/N settings for MRR (A2B3C2D2) and for roughness (A1B1C1D3) disagree, which is why a grey relational multi-objective analysis was applied. The response optimizer put the maximum predicted MRR at 58.68 mm3/min for 200 V, 48 A, 6.4 µs and 12.8 µs.

Zitieren

APA

Nirvan, S. K. (2026). Multi-Objective Optimization of EDM Process Parameters in Machining SAE 1015 Mild Steel: A Taguchi-DOE Approach. Natural Resources for Human Health, 6(21s). https://doi.org/10.53365/nrfhh.4374

Vancouver

Nirvan SK. Multi-Objective Optimization of EDM Process Parameters in Machining SAE 1015 Mild Steel: A Taguchi-DOE Approach. Natural Resources for Human Health. 2026;6(21s). doi:10.53365/nrfhh.4374

BibTeX
@article{Nirvan2026,
  author = {Nirvan, Sushil Kumar},
  title = {Multi-Objective Optimization of EDM Process Parameters in Machining SAE 1015 Mild Steel: A Taguchi-DOE Approach},
  journal = {Natural Resources for Human Health},
  year = {2026},
  volume = {6},
  number = {21s},
  doi = {10.53365/nrfhh.4374}
}
Kostenlos starten →