Reuse of cast-in-place concrete: overcoming industry barriers
Buildings and Cities · 2026-11-04 · 7 (1) · 1233-1254
DOI: 10.5334/bc.856 ↗At a glance
Journal article in Buildings and Cities, published on 2026-11-04. Written by Mathieu Romann and 1 co-authors. 45 references.
Abstract (original language)
Mainstreaming the reuse of elements extracted from cast-in-place (CIP) reinforced concrete (RC) structures beyond pilot projects requires more than environmental motivation: it requires resolving technical, logistical, contractual and institutional barriers. Research has so far centred on prefabricated systems, leaving CIP structures only partially addressed. The latter are monolithic: recovering elements requires saw-cutting, and every transaction currently demands bespoke negotiation between donor and receiving projects. This bilateral matching does not scale. A systemic analysis is presented of three recent Swiss deconstruction case studies. Four categories of barriers are identified that together prevent the formation of an industrial reuse market. Drawing on a steel-section analogy and a synthesis of systemic interdependencies, three conditions are formulated for creating a viable market for CIP reuse involving a decoupling of supply and demand (a normalised dimensional grid, versatile connection systems, and a stock-holding and guarantee function). Elements would therefore be cut and stocked before any receiver is identified. Standardising element dimensions proves limiting for a heterogeneous stock and a small demolition flow. A set of more versatile connection details would reduce costs and enhance the reuse of CIP elements. PRACTICE RELEVANCE To mainstream CIP concrete reuse beyond pilot projects, three changes in industry practice are immediately actionable. First, pre-demolition reusability assessments with standardised factsheets should become routine inputs to design, reframing the engineer’s role from a specifier of new products to a characteriser of an existing material stock. Second, template donor–receiver contracts allocating liability, custody and inspection should replace case-by-case negotiation. Third, the design community should converge toward a versatile family of connection details (timber, steel or concrete substructures accepting a range of element dimensions), so that elements from different donor structures remain interchangeable with each other and with new slabs. The Simplon case (CHF128/m², about €137/m², for extraction alone versus CHF200/m², about €213/m², for an equivalent new slab) indicates that extraction is economically viable. What remains is the value-chain reorganisation that downstream coordination requires.
Cite
APA
Romann, M., & Bastien-Masse, M. (2026). Reuse of cast-in-place concrete: overcoming industry barriers. Buildings and Cities, 7(1), 1233-1254. https://doi.org/10.5334/bc.856
Vancouver
Romann M, Bastien-Masse M. Reuse of cast-in-place concrete: overcoming industry barriers. Buildings and Cities. 2026;7(1):1233-1254. doi:10.5334/bc.856
BibTeX
@article{Romann2026,
author = {Romann, Mathieu and Bastien-Masse, Malena},
title = {Reuse of cast-in-place concrete: overcoming industry barriers},
journal = {Buildings and Cities},
year = {2026},
volume = {7},
number = {1},
pages = {1233--1254},
doi = {10.5334/bc.856}
}
EUVIMED