EUVIMEDEUVIMED entdecken
Crossref

Design of Digital Beam Steering Array Antenna for S-band Spectrum Applications

Sudhir Kadam

Dandao Xuebao/Journal of Ballistics · 19.06.2026 · 38 (2) · 805-818

DOI: 10.52783/dxjb.v38.413 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Dandao Xuebao/Journal of Ballistics, online erschienen am 19.06.2026. Verfasst von Sudhir Kadam.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Antennas are not only versatile in regard to geometrical form, but also in terms of use. In array configuration, it is more popular to block such properties of a single patch of MPA as low gain, and reduced bandwidth. The work is the design and the fabrication of a MPAA which is printed on the composite-ferrite- dielectric substrate. Linear configuration Two rectangular radiating patches are attached to the substrate of low dielectric content with the intention of providing the required radiation properties. It uses the MS array (MA) feeder network that is a feeder network that is composed of integrated power divider and phase shifters. The signal phase insertion of propagating signal of the microwaves is realized by the tunable progressive phase shift, which is caused by modifying the magnetic bias in order to change the permeability of ferrite material and consequently, the signal phase velocity. The power splitter that is obtained is that of the two-way power splitter that boosts matching and isolation of the ports. The normal equation on which the antenna array development is based is simulated under professional software which is known as, HFSS. It has been chosen among other antenna simulators due to the option of anisotropic ferrite material in case of undertaking simulation. The antenna prototype is plotted in PCB plotter and transferred manually on the composite substrate that created low level inaccuracy. Finally, the simulated response of the reflection is supported by the experimental results of the reflection in combination with the radiation nature of the developed antenna array using the Network Analyzer and the Antenna Transmission and Measurement System respectively. The array that was created was quite close to the radiation of the design response.

Zitieren

APA

Kadam, S. (2026). Design of Digital Beam Steering Array Antenna for S-band Spectrum Applications. Dandao Xuebao/Journal of Ballistics, 38(2), 805-818. https://doi.org/10.52783/dxjb.v38.413

Vancouver

Kadam S. Design of Digital Beam Steering Array Antenna for S-band Spectrum Applications. Dandao Xuebao/Journal of Ballistics. 2026;38(2):805-818. doi:10.52783/dxjb.v38.413

BibTeX
@article{Kadam2026,
  author = {Kadam, Sudhir},
  title = {Design of Digital Beam Steering Array Antenna for S-band Spectrum Applications},
  journal = {Dandao Xuebao/Journal of Ballistics},
  year = {2026},
  volume = {38},
  number = {2},
  pages = {805--818},
  doi = {10.52783/dxjb.v38.413}
}
Kostenlos starten →