Wideband glass resonator antenna array for D-band applications
International Journal of Microwave and Wireless Technologies · 06.11.2026 · 1-11
DOI: 10.1017/s1759078726103948 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Microwave and Wireless Technologies, online erschienen am 06.11.2026. Verfasst von Mario Faliero und 2 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This paper presents the design of a wideband pyramidal inverted glass resonator antenna (PIGRA) for sub-terahertz applications. The proposed glass antenna concept is demonstrated through two implementations: (i) a single radiator integrated on a single-layer glass Printed Circuit Board (PCB) based on a glass-on-glass architecture, and (ii) a 4 times 4 $4\times4$ 4 × 4 planar square PIGRA array implemented on a two-layer Rogers CLTE substrate. The single-radiator implementation achieves an impedance bandwidth exceeding 42 percent sign $42\,\mathrm{\%}$ 42 % , covering the entire D-band ( 110 $110$ 110 – 170 GHz $170\,\mathrm{GHz}$ 170 G H z ), with a peak realized gain of 5.8 dBi $5.8\,\mathrm{dBi}$ 5.8 d B i . The 4 times 4 $4\times4$ 4 × 4 array achieves a 38 percent sign $38\,\mathrm{\%}$ 38 % impedance bandwidth in D-band, and a peak realized gain of 15 dBi $15\,\mathrm{dBi}$ 15 d B i . The proposed antenna is fabricated using laser-induced deep etching (LIDE®) technology from LPKF® on Schott® BF33 borosilicate glass, demonstrating for the first time the feasibility of 2.5D glass micromachining for antenna structures operating at frequencies above 100 GHz $100\,\mathrm{GHz}$ 100 G H z . The glass PCB of the single-radiator implementation is metallized through physical vapor deposition, followed by an electroplating process. The design methodology, fabrication process, assembly approach, and measured performance are presented and compared with full-wave electromagnetic simulation results obtained using CST Microwave Studio. The measured results are in good agreement with the simulations and validate the proposed glass-based PIGRA architecture for D-band and beyond wireless communication and sensing applications.
Zitieren
APA
Faliero, M., Zwick, T., & Bhutani, A. (2026). Wideband glass resonator antenna array for D-band applications. International Journal of Microwave and Wireless Technologies, 1-11. https://doi.org/10.1017/s1759078726103948
Vancouver
Faliero M, Zwick T, Bhutani A. Wideband glass resonator antenna array for D-band applications. International Journal of Microwave and Wireless Technologies. 2026:1-11. doi:10.1017/s1759078726103948
BibTeX
@article{Faliero2026,
author = {Faliero, Mario and Zwick, Thomas and Bhutani, Akanksha},
title = {Wideband glass resonator antenna array for D-band applications},
journal = {International Journal of Microwave and Wireless Technologies},
year = {2026},
pages = {1--11},
doi = {10.1017/s1759078726103948}
}
EUVIMED