EUVIMEDEUVIMED entdecken
Crossref

Design of a tuneable tool holder to improve stability and damping of slender cutting tools in turning

JOSU Peña, ASIER ASTARLOA, AITOR OLARRA OLARRA, JOKIN MUÑOA GOROSTIDI, HARKAITZ URRETA PRIETO, JOSU AGUIRREBEITIA CELAYA

DYNA · 01.11.2026 · 101 (6) · 533-540

DOI: 10.52152/d11582 ↗

Kurz gefasst

Fachartikel in der Zeitschrift DYNA, online erschienen am 01.11.2026. Verfasst von JOSU Peña und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Turning operations, particularly in internal machining, require the use of slender tools whose high dynamic flexibility promotes the onset of self-excited vibrations, thereby limiting the cutting performance. Traditionally, this issue has been addressed using anti-vibratory bars, which incorporate a damper to attenuate tool vibrations. However, their added complexity and cost have led to reluctance among end users, motivating the search for alternative solutions. This study proposes an innovative strategy based on inducing modal coupling between the tool and machine components to damp the tools, eliminating the need for anti-vibratory tools. To achieve this, a tuneable toolholder is designed with an easy integration into the machine. This toolholder enforces modal coupling with standard bars, enhancing process stability. The system operates over a wide frequency range, enabling vibration attenuation across various bar configurations. Its development is supported by theoretical analyses and simulation tools to evaluate tuning capability and optimize the dynamic response, aiming to ensure stable turning conditions.

Zitieren

APA

Peña, J., ASTARLOA, A., OLARRA, A. O., GOROSTIDI, J. M., PRIETO, H. U., & CELAYA, J. A. (2026). Design of a tuneable tool holder to improve stability and damping of slender cutting tools in turning. DYNA, 101(6), 533-540. https://doi.org/10.52152/d11582

Vancouver

Peña J, ASTARLOA A, OLARRA AO, GOROSTIDI JM, PRIETO HU, CELAYA JA. Design of a tuneable tool holder to improve stability and damping of slender cutting tools in turning. DYNA. 2026;101(6):533-540. doi:10.52152/d11582

BibTeX
@article{Pea2026,
  author = {Peña, JOSU and ASTARLOA, ASIER and OLARRA, AITOR OLARRA and GOROSTIDI, JOKIN MUÑOA and PRIETO, HARKAITZ URRETA and CELAYA, JOSU AGUIRREBEITIA},
  title = {Design of a tuneable tool holder to improve stability and damping of slender cutting tools in turning},
  journal = {DYNA},
  year = {2026},
  volume = {101},
  number = {6},
  pages = {533--540},
  doi = {10.52152/d11582}
}
Kostenlos starten →