EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Double-Arc Cutting Tool Design and Cutting Performance

Mengchao Fan, Chunxu Bi, Caixu Yue, Xianli Liu, Yingnan Zhu

Applied Sciences · 14.03.2023 · 13 (6) · 3689

DOI: 10.3390/app13063689 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 14.03.2023. Verfasst von Mengchao Fan und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Nature Science Foundation of China, Natural Science Foundation of Heilongjiang Province of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the increasing complexity of the workpiece surfaces in aerospace and automotive molding and other areas, an increasing number of cutting tools with different shapes and performance have become necessary. A new kind of cutting tool is developed with a double-arc revolving surface at the tool’s end to improve the processing quality in numerical control milling, referred to as a double-arc cutting tool (DACT) in this paper. The parametric geometric model of the DACT is established. Three types of cutting-edge curves are proposed (a cutting edge with a constant helix angle, a cutting edge with a constant pitch, and an orthogonal spiral cutting edge). Corresponding numerical simulation results are also provided as graphical representations. A DACT is manufactured and tested to verify its feasibility. Finally, two contrast experiments are conducted to prove that DACT has a higher processing quality than a ball-end mill (BEM). The advantage of the DACT is verified, which provides a theoretical basis for higher quality machining. The parametric design and application research provides a new method and theoretical basis for other new types of cutting tools.

Förderung

  • National Nature Science Foundation of China
  • Natural Science Foundation of Heilongjiang Province of China

Zitieren

APA

Fan, M., Bi, C., Yue, C., Liu, X., & Zhu, Y. (2023). Research on Double-Arc Cutting Tool Design and Cutting Performance. Applied Sciences, 13(6), 3689. https://doi.org/10.3390/app13063689

Vancouver

Fan M, Bi C, Yue C, Liu X, Zhu Y. Research on Double-Arc Cutting Tool Design and Cutting Performance. Applied Sciences. 2023;13(6):3689. doi:10.3390/app13063689

BibTeX
@article{Fan2023,
  author = {Fan, Mengchao and Bi, Chunxu and Yue, Caixu and Liu, Xianli and Zhu, Yingnan},
  title = {Research on Double-Arc Cutting Tool Design and Cutting Performance},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {6},
  pages = {3689},
  doi = {10.3390/app13063689}
}
Kostenlos starten →